Recent content by OldTechnut

I hate to be a stick in the mud, I just reflashed my bios to 0803 from 0801. The system first booted but it still remembered that I had set the ratio to 5:4 (linked) which set my memory to 853.3. When I reset the memory to auto (800mhz) the system failed to boot, even to setup access. With My...

The Hd0 and Hd1 are IDE drives , I don't get temps on the two Sata installed drives.

SpeedFan version is 4.33 and Everest Ultimate Edition 4.20 and the reading are there, The only difference I see is I am running Vista Business 64 only. Are you running these programs in the XP or Vista operating system?

Digitalether, In comparing the temps from speedfan 4.33 on my Quad system to Everest Ultimate Edition 4.20 readings. Temp1 = CPU, Temp2=MB,No match on Temp3. HD0 and HD1 are matches to harddrive temps. Core 0, Core 1, COre 2 and Core 3 are all 15 degrees lower on Speedfan 4.33 than on...

Interstate Batteries carry or will order in the neaborhood of $25

antirobot, As I posted there is a memory hole between 712 and about 830 my system runs and boots fine at either 711 or 866.:cool:

Ancalagon The Black I purchased my board from New Egg about three weeks ago and it came with 0703 which I updated to 0801. No bios problems except the memory hole which is in all of the versions. hope this helps:)

Acharash, I spent the last five days, installing and updating this motherboard and after reviewing the ASUS site under the motherboard (forum), I have found that there is a definite memory hole with this motherboard. I started with XP Pro SP2, and could only install two of the 2gig sticks of...

Timstow, I am running this memory, the only way I was able to use all of the 8Gig, was to install the additional 4Gig after updating from XP Pro sp2 to Vista Business (64bit), also you have to avoid the Bios's Memory hole at (800) mhz, set the memory speed to (711) or greater that (866) mhz...