Recent content by Nucleas

Hi, Just changed my CPU to 2.8 Gb (C)... Anybody can suggest the OC limit? I'm still using the 512 PC 2700 DDR Kingston Value. Definitely have to stick to 5/4 timing.... Can somebody tell me what to do with my RAM timing like 2.5-3-3-7...? How to change that setting accordingly?

Orion, there u are... I remove CMOS battery & unplug power to clear CMOS...Ya complete the update BIOS process untill it asked me to reboot. Actually it was my capture card that block the reboot. I remove it and reboot, it works. Then I fix the card back after done the BIOS setting. If I...

Paging Orion... I got a big problem here! Last nite I installed "Flashmenu 130" to update BIOS "is7g16" but failed. I'm using IS7-E. The BIOS I downloaded from ABIT site. From the Flashmenu software, I update the ".BIN" file. After finished, I was asked to reboot, then I hit "yes". Then I...

hi, long time never drop to this room, very busy lately. Orion, I just found out there is new bios ver is7g16. Is it stable? anything to benefit much from it? currently using ver is7g14. I'm using IS7-E mobo. 2.4Gig (B) OC to 2.7Gig. I could OC to max 2.9Gig. I stay lower coz need...

Frens, I'm using Processor B type and only use DRAM PC2700. Suppose that's the limit..??? Maybe yours is C type and Performance DRAM. About the heat level, I'll try to get one.

Hi, Uh...my OC impossible to level ur playground. Anyway, just want to post the best result with my P4 2.4B on IS7-E. I got 2.9GHz with 161 fsb. NB strap at 800 FSB. DRAM ratio 5:4 with GAT F1 CPU & DRAM V core is default Just my CPU is little hot with stock heatsink, 69 deg celcius. Is...

**** Previously I said, using 1:1 DRAM ratio, it's actually running at 5:4(I'm using 333DRAM). Dead Parrot, I would need to change my HSF if wanna do that. I still haven't try 3.0Gig with stock Vcore. Scared might burst the CPU if w/o better HSF. Is Coolermaster is good(the one w/o heat sink...

Guys, I see many can do 200-250FSB, but PLS MENTION UR STOCK SPEED and new CPU speed. I just wonder how far I can push my P4 2.4B with 800FSB strap. So far I can push to 2.9GHz with stock core voltage. Mine is still far away from 200FSB. I wonder how u can get that high? I think u guys r using...

"I wish we could run F1 with the 2.4C's. BIOS 15 is available for download. If 62 is IDLE than I would worry but if that is your temp under load for a couple hours I wouldn't worry. What do you have your Vcore set at and what kind of memory? " ------------- Orion, thanks, fast reply. I also...

Hi I tried this setting, seems work but little hot on CPU(P42.4B) CPU/AGP/PCI 150/66/33 New speed 2.7GHz NB strap 667 DRAM ratio 1:1 DRAM timing 2.5-7-3-3 F1 Sys temp 45 degrees CPU temp 62 (ori HSF, gonna replace to Zalman?) cpu fan...

Hi Orion, I think PCI latency is only 32 bit, can I set it higher...? Can somebody explain how to tune PC, something like this(I know it's OC thing, but I don't know how it works). ----------------------- I got my P4 2.4C to run at 3.0 GHz using the 5:4 divider and 250 FSB. My memory is still...

hi Orion, can u help me to verify my problem..? Is it really BIOS problem that can't recognise my RT100(PCI video capture card). Something that give "blank" to my monitor when start up... Anybody came upon to this before. Gracious

Hi, Last nite i update BIOS. Setting is default. PC health: CPU warn 85C SYS temp 37C CPU temp 48/49C Pwr temp 43C CPU fan 2410 rpm NB fan 5625/6026 rpm CPU core 1.45\1.47V DDR 2.6V AGP 1.55V How to increase performance with my spec with little...