Recent content by neteng1958

Hey thanks for info. How did you deal with the NB heat. I am going to try using silicone to attach a small fan to the top of the stock NB heatsink. I have read that a few people have tried that with success. They put a dab of silicone at each corner of the fan an push it on to the heat sink...

Thanks for that help. As you can tell by the way I worded this I am a little new but am trying to get better. Currently I am running my E6400 on a GA-965P-S3 at 400x7 and all stock voltage except the Vcore which I reduced from 1.35 to 1.2625. I have all info about this in the other post I put up.

This seems to be working for me so if anyone has any questions please ask away. GA-965P-S3(BIOS ver 8.0) E6400 GSKill PC6400(800) RAM Stock cooling on Cooler Master Centurion Case (Added 1 80mm to side of case blowing into case) Disabled all recommended items in C2D OC ver 1.1...

I was wondering is someone could help me with these 2 questions. 1.) If there was 2 ways to reach the same exact speed using the mult and FSB is one preferred over the other. Example: I can OC my E6400 to 2.4 Ghz two ways - (8X mult and 300 FSB) or (6X mult and 400 FSB) Is one way...

Thank You - Great! has been downloaded and ready. System as ordered MOBO - GA-965P-S3 CPU - E6400 RAM - 2 Gig G SKILL PC 6400 1.8V - 2.0V PSU - Corsair 520HX GPU - eVGA 8800GTS HDD - 2 WD 250 GIG SATA 7200 drives in RAID 1 Case - Cooler Master centurion 5CAC-T05-UW Black Aluminum...

I have seen that. Some say yes others say no. I called Gigabyte this morning and the tech guy says its is supported on one of the two SATA controllers and is limited to only 2 drives. On the other hand When I look at the Newegg specs it shows no RAID support for the S3 but there is support on...

Hi All I just ordered this board and was looking to see if there was a good reference on how to configure the SATA Raid. Trying to get everything together so I can be ready. Thanks