Recent content by Neeno

  1. N

    No Power to Computer

    I didn't insert anything on that jumper. I read over that part and interpreted it as "default = don't need to do anything". The only ones I put in are the HDD LED, power switch, and reset switch. Double checked to make sure ground was facing the right direction.
  2. N

    No Power to Computer

    This only happens on the initial power on. Reboots are fine. Sleep mode couldn't wake up. I hit all manners of keyboard buttons, moved mouse, hit mouse buttons, monitor stopped getting signal (basically what I see when it doesn't work). The keyboard then went into a seizure (Logitech G15)...
  3. N

    No Power to Computer

    No crashes since, all that leaves is this cable pulling and replugging (displayport) before the system would power on. Otherwise CPU_LED stays solid red. Any ideas on why that happens?
  4. N

    No Power to Computer

    Core Temp reports: All cores are 30C to 34C. Min is 29C on cores 1-3 and 32C on core 0. Max is 36/38/33/37. Load does from 0-3%. The weird thing is the computer works just fine after doing that cable pulling and replugging dance. No crashes, no hangs, no BSOD, no screwed up graphics or...
  5. N

    No Power to Computer

    Using Intel stock cooler. Same one that came with the CPU.
  6. N

    No Power to Computer

    I've swapped displayport cables once and tried HDMI as part of this morning's testing. No luck.
  7. N

    No Power to Computer

    Just wrapped up trying a pile of stuff: 1: moved graphics card into a different PCI-E slot: same problems 2: unplugged everything and replugged everything: same problems Observations: 1: turning on the system without doing anything will result in the CPU_LED light staying a solid red...
  8. N

    No Power to Computer

    Just woke up and system would not power on again until I yanked the displayport cable and replugged. (worked after one time but some times it'll be stubborn). Also remembered that I never found any switch to turn off the onboard video in the BIOS. Is there a way to do that and is that a...
  9. N

    No Power to Computer

    Okay, did a pile of stuff, replaced the PSU and the system powers.... sometimes. Sometimes when I hit the power switch, it will work fine. Other times (more often than not) I hit the power switch and the CPU LED stays red and I see no signal to monitor. I swapped my graphics card for a spare...
  10. N

    Computer powers now but memory is iffy

    Found a fix- Turns out I had to lower the speed on my ram. Everything running smoothly now.
  11. N

    Computer powers now but memory is iffy

    Thanks to help already received, I can get power to my new build. However, it seems there is a problem with my RAM. When I only plug one stick (G.Skill F3-10666CL9S-4GBRL), it will sometimes POST after pressing the MEM OK! button on my motherboard. When I don't press it, it usually will not...
  12. N

    No Power to Computer

    I just went to Youtube to see how people do this and then I look at my equivalent connector and see that all the wires are black. How do I go about doing this? UPDATE: Just put the PSU into another computer and it works. UPDATE2: Plugged in a cheapy spare PSU I had and it powers on. Does...
  13. N

    No Power to Computer

    Before I get to that, there's something I forgot to mention: The back of my sound card has a Red LED light that's on. I didn't see any LEDs on the motherboard- (don't know if this motherboard has any). Thanks for your quick reply!
  14. N

    No Power to Computer

    I put together a computer upgrade after several years- however, when I got to the crowning moment, the computer won't turn on. Here are the things I do know and everything carried over was working in the 2 minutes before I turned the old system off for the last time: 1: The graphics card is...
  15. N

    New System Build won't Post

    Indeed. I've been spending almost every waking moment trying to demystify other unrelated computer issues that I've forgotten to wrap this thread up. Thanks everyone!