Recent content by NavJitsU4

  1. N

    I bought my 3930K in June of 2012! Holy crap!

    Last week I upgraded from my Q6600/GTX660/8GBDDR2 to i54790/r9 290/16gb. I game almost every weekend, and the OC'd Q6600 lasted me from 2007 to 2016! I originally had a 8800gt in it, upgrade to the gtx660 2 years ago. It played everything at 1080 up until recently (new doom, gt5 etc it just...
  2. N

    WiFi Range Extender Question

    I have an Asus RT-AC66R, I've set it up to send two WiFi signals (guest and private). I need a range extender to reach the far corners of my office, my question is will a range extender extend both guest and private signals?
  3. N

    R9290 & EVGA 780i / Q6600 = BSOD

    Bump for answers to life's real problems :)
  4. N

    R9290 & EVGA 780i / Q6600 = BSOD

    I've got the 8 pin and 6 pin plugs connected to the card form the PSU but my motherboard doesn't have anything for PCI-E, do alll new motherboards have this?
  5. N

    R9290 & EVGA 780i / Q6600 = BSOD

    My current setup is old (built in eary 08, except for the PSU and Video card with were upgraded a year ago): Intel Quad Core Q6600 (45nm! kentsfield, Oc'd to 3.4Ghz) 8GB DDR2 EVGA 780i Thermaltake 850w PSU EVGA 660GTX Windows 7 Ultimate 64bit (Patched completely) I was given an Asus R9 290...
  6. N

    Multi-Monitor & Persistent Windows

    I have 6 monitor setup that's being used to display information in a lobby. Is there a program out that that can launch specific applications and browser windows and snap them to specific screens when the computer turns on? The video card that's being used is a VisionTek Radeon HD 7870. Thanks!
  7. N

    Find available expansion slots on a Mac remotely

    I'm working on a 10.6.8 OSX server, and need to know if there is any way I can find what expansion slots (PCI-E, PCI etc) are available, and I need to do it remotely because there is no one available to physically check. Is there a program or something built into the OS that I can use to...
  8. N

    Software to check RAID status

    Hardware RAID
  9. N

    Software to check RAID status

    Hello everyone, Here are a few details about the setup: Motherboards were manufactured around 2008-2010, and are running either Windows Server 2003 or 2008. Software provided by manufacturer does not work in above OS. Motherboards are mix of Intel or Asus brand. Is there any software...
  10. N

    Office 2013 Home & Business

    I have a new Dell Laptop and it came with a Office 2013 Home & Business key; normally they include a trial that you unlock with the key provided but there's no trial on this computer. I tried searching for a Office 2013 H&B trial download but could not find one. Anyone know where I can find...
  11. N

    OSX Server 10.6.8 Startup Disk Full

    Hello all, I'm working on a server that had a full startup disk, I managed to clean up unnecessary files and applications and recovered a lot of space. However, the startup disk got full again. If I "get info" on all of the folders on the startup disk, the space used only adds up to 20gb, the...
  12. N

    660ti in older generation PC

    I play at 1920x1080 I've been playing Crysis 2, it scaled down pretty well and looks great at 1920x1080 even on the 8800gt but I'm excited to see what it will look like with a new DX11 GPU. Witcher2, but I shelved it because it ran kinda slow. Hoping that the 660ti will be able to churn...
  13. N

    660ti in older generation PC

    Here's my PC specs (built in late 08): Intel C2Q Q6600 @ 3.4Ghz EVGA 780i Mobo (PCI-E 2.0 Only) 8GB Memory 10000RPM Sata HDD 650Watt PSU I had a 8800GT in this system that died this morning. From what I've read, there isn't a huge difference between PCI-E 2.0 and PCI-E 3.0. Not sure if...
  14. N

    Help me rejuvenate my LANs

    I just purchased Magicka, I can see how this game can be fun on LAN! I can't figure out how to start a lan game, can someone help me?
  15. N

    IPAD VPN to Win2003Server - Shared Secret Problem

    On the IPAD PPTP VPN configuration screen a shared secret must be entered, it doesn't connect if I leave the field blank :(