Recent content by mervincm

  1. mervincm

    Question *STABLE* NVMe - USB Adapter?

    I have since purchased one additional cable. With this new cable (1meter Cable Matters C<>C USB3.1G2 10Gbps CERTIFIED) and the Jeyi 2.08 firmware, my JMS583 based unit is still solid on the rear port, and still flakey on the case port. My fractal designs case offers aq front USBC 3.1G2 port...
  2. mervincm

    Question *STABLE* NVMe - USB Adapter?

    Cables are making a big difference for me even on 2.08 firmware. all testing on Asmedia USB3.1G2 ports on my ASUS PRIME x299-Deluxe-v1. Samsung cables are stable speeds, and there is no difference if I rotate the USB-C end. TDBT cables were never as fast, vary slightly each time and I saw ~...
  3. mervincm

    Question *STABLE* NVMe - USB Adapter?

    Thanks for the clarity, It was my misunderstanding. I will try the jeyi firmware and see how it goes!
  4. mervincm

    Question *STABLE* NVMe - USB Adapter?

    The included cables are definitely impacting my experience. TDBT replaced my unit + cables as they suspected it was defective, unfortunately, the replacement is the same. Less than stellar performance using the A-C cable, and unstable using the A-A cable. I tried using my Samsung T5 cables and...
  5. mervincm

    Question *STABLE* NVMe - USB Adapter?

    My TDBT SuperC NVME enclosures are also JMS583 A0. I actually have two only a couple weeks old. They both came with newer firmware than 2.08. They are Version 234.01.00.01
  6. mervincm

    Question *STABLE* NVMe - USB Adapter?

    Yes they are visibly different. The A-C cable that TDBT included with my SuperC NVME enclosure is slightly thicker, stiffer, and shorter than the cable that samsung included with my T5-1TB external SSD.
  7. mervincm

    Question *STABLE* NVMe - USB Adapter?

    I noticed considerably better (780MB/s to 980MB/sec) write performance on my test drive (Jmicron) after I swapped from the included A-C cable to the A-C cable that came with my Samsung t5. This was on an asmedia 3142 chipset A connector. Stable and no disconnect.
  8. mervincm

    What Z370 or X299 board is for me?

    Decided on the ASUS Prime x299 Deluxe. so far it meats everything except for the secondary NIC AQC107.
  9. mervincm

    What Z370 or X299 board is for me?

    looking to upgrade my gigabyte z170-UD5 Hoping that a Z370 (w 8700k) will do, if not I might spring for an X299 (with 7820X) Hoping to re-use my current 770 GTX, while I wait for new Nvidia GTX 2060. I need an HDMI out for audio receiver. unfortunately, this can't be used for a monitor as well...