Recent content by Matego

I did what you guys told me I increase the fsb to 333 so 333*9 = 3Ghz Leaving all the voltage at stock. It boots up and I ran orthos for a while, max temp is around 43C since its winter here. I saw people can get 3.4 from their E6600, any huge difference in performance between 3.0 and...

Hi guys I am sorry if this have been asked before. I am currently running all my system at stock speed. E6600 @ 2.4 OCZ platinum DDR2-800 Rev.2 @ 4-4-4-15 ASUS P5W DH deluxe is my motherboard. What Im thinking of doing is increase the FSB to 333, multiplier at 9 so would give me 3.0Ghz...

Hi. I have been using this mboard for a while now and been very happy with it. However, I would like to overclock my E6600 from 2.4 to 3ghz and since I am new to oc-ing, was wondering if you guys can give me some pointer. So far I know I have to increase the vcore voltage, then keep the...

Yup thats the one, so the setting that I have used is suitable right? Timing 4-4-4-15-4 with 2.1 volts ? And with the 5th number, will it perform better if I change it to 5 ? Another question that I have would be with the memtest86. I used memtest86 v1.70 with the floppy disk. What would...

Sorry, kinda new in the forum. So just to repeat My memory is OCZ 2x1GB PC26400 Platinum Rev 2 Mem timing changed to 4-4-4-12 and mem voltage changed to 2.1v Are these setting okay for my system? Then I ran the memtest86+ and everything looks okay, however I am unsure of what the...

Hi, I just built new machine, spec is in my signature. I just changed my memory setting and was wondering if it is okay or not. Mem timing changed to 4-4-4-12 and mem voltage changed to 2.1v Are these setting okay for my system? I ran the memtest86+ and everything looks okay, however I...