Recent content by Lycan

Very small increase in overall memory bandwidth. No issues so far, seems to be running sweet. Lycan

Yep, I agree with you Jgtdragon... my 1.8a C1 does 3168 at default voltage. No matter what voltage I give the core, it wont clock up any higher.

Mine takes ages for the video to initalize. Good 2 to 3 minutes. Unsure why. Give it some time.

Mine kills me Sound Blaster at 146Mhz :( No reboot problems though. I think the 4SDA+ has the advantage of jumpers rather than the BIOS for adjusting/setting the v-core. Sounds like the standard cold boot problem where the MB doesnt supply anything apart from the standard 1.5volts until the...

166FSB Ram @ 3.2 volts. I'm about to starting dropping the RAM voltage down a bit at a time while trying to stay at 166MHZ. Reboot problem too. I think its a AGP Voltage problem :(

No control :( But I'm running @ 166Mhz FSB with my GF2-GTS and its sweet.

yes, it fits.

Hi guys, I've got a real major problem here with my BXMaster motherboard and some PC-150 Mushkin HSDRAM I just purchased. I'll give you some background... The PC-150 Ram from Mushkin requires RAM settings of: Cas Latency = 2 RAS to CAS = 3 Precharge Delay = 2 to run at anything over 124FSB...

Dude, Check out this page on the 933EB processor: http://www.anandtech.com/showdoc.html?i=1247&p=2 See the core voltage figure? So technically, bumping up the voltage by 0.05 of a volt isn't technically going out of spec :) I'm mean, if its good enough for intel... ;) HEHEHE Lycan

966 = 1165

Hi guys... Back again :) I'm having some problems with soft reboots of my PC. Config is: P3-700 @ 966 (1.75v). MSI BXMaster (Latest 5.5 BIOS) Creative Geforce2 @ 220/365 Everything runs fine but if I do a soft reboot (CTRL+ALT+DEL) on the computer, it won't reboot. Just sits there with a...

Hi all, I've heard that increasing the VIO Voltage on the motherboard can help to reduce stability problems with higher (140+) FSB speeds... anyone care to offer some results/experience with this?? I've current got a p3-700 running @ 966 (138FSB/CAS3/1.75) and I'm having a few stability...