Recent content by loonatik

  1. L

    Corsair 3200XL Cas 2-2-2-5

    Here is my system CPU: Athlon 64 3800+ Board: Gigabyte GA-K8N Ultra-9 Memory: 1gig (512x2) Corsair 3200XL Cas 2-2-2-5 Drive: Seagate 120GB Barracuda 7200RPM SATA with NCQ SATA150 Video: eVga 6800 Ultra Case: Antec PLUSVIEW1000AMG PSU: Antec Truepower 480w I first started experiencing...
  2. L

    SATA 100/150/II

    Well I finally got it going. I ended up just using the SATA2 native controller. All I had to do was use the SATA2, disable raid, and install. It worked perfectly. I did learn about controllers like the sil though. They require additonal drivers to work. I appreciate your help ribbon. I would...
  3. L

    GA-K8N Ultra-9 and SATA150

    Ok, through talking to a friend I know understand SATA = SATA150. I think where I was hitting problems is I was trying to use the sil 3114 controller and that requires additional drivers to be installed.
  4. L

    GA-K8N Ultra-9 and SATA150

    Drive http://www.seagate.com/cda/products/dis...es/marketing/detail/0,1081,646,00.html http://www.newegg.com/app/ViewProductDesc.asp?description=22-148-039&depa=0 Board http://www.giga-byte.com/MotherBoard/Products/Products_GA-K8N%20Ultra-9.htm...
  5. L

    SATA 100/150/II

    Ok, here is what I have done. I have reset defaults in cmos. I have changed the boot priority to CDROM > Hardrive. I moved the drive to SATA1 (Not SATA0, which dosent work either). Which are the red connectors and red cable between the yellow and purple headers. The drive does not show up in...
  6. L

    SATA 100/150/II

    .
  7. L

    SATA 100/150/II

    If I go into the Raid configuration utility, it shows my drive as a physical drive and it asks me to create a raid set. I have the option to make a JBOD (Single) Raid set. Would this help me at all? I think I figured out how to enter F6, im going to try that right now.
  8. L

    SATA 100/150/II

    Should I have all the raid stuff disabled or should I just leave bios defaults?
  9. L

    SATA 100/150/II

    Hmm, using the red cable its not detecting the drive. What floppy should I have? This is an OEM drive. Do I need to get it from seagate? (Going to look)
  10. L

    SATA 100/150/II

    Well I am having problems. I assume what you are saying is this should work. I think I finally got raid disabled and im going to try to reinstall windows again. I assume I should be using the red cable not the yellow one. I have tried both. Has anyone else experienced this before?
  11. L

    SATA 100/150/II

    I currently have the GA-K8N Ultra-9 motherboard. 4 x Serial ATA 2 3.0Gb/s with NV Raid 0/1/0+1 4 x Serial ATA with RAID 0 or 1, RAID5 by Silicon Image sil 3114 controller .... I also purchased the Seagate 120GB Barracuda 7200RPM SATA drive. Interface: Serial SATA 150 .... I...