Recent content by kevinflames

bumpsorry :s

bumpsorry

I converted a vhs video to mpeg using a video capture card. I only captured mono sound , since the only possible way i could conect audio to the pc was using just one connection (white one) so , yeah i recored it and it plays fine on the pc i write it to svcd and the sound is very...

thanks guys. stability is fine, i havnt seen one bsod yet or a crash. im hoping temps would lower if i cut the fan grill out from the back, you think so? as for thermal paste , i tried to put not alot on. i bet its about 1mm thick

sorry guys bump

I bought a system with a 2500barton with overclocking it to 3200 in mind. i built it, with the standard heatsinkfan amd supplies. i had about 55C idle and like 63 load or somthing. now i installed a new heatsinkfan. a Arctic cooling copper silent 2l. im now 50 idle and 57 on load and temp...

bump :( sorry

SpeedFan 4.13 shows these readings Vcore1 : 1.68V Vcore2 : 2.67V +3.3V : 3.26V +5V : 4.17V +12V : 11.90v -12V : -9.15v -5V : -4.75V +5V : 4.62V Vbat : 4.08V now, should i be concerned about the low/high -12V reading? in my case i have: IDE hard drive CD writer 9800pro...

i just brought a thermometer into my room , il try to check the room tempereature. cpu heatsink its on the right way lol thanks for your posts EDIT : how much more should the motherboard be from room temperature ? and cpu also? EDIT2: ran prime95 , only for 9 minutes , but the cpu temp...

bump sorry :(

the pc is completely working now. i dont think i care about the pc speaker buzzing all the time.. im only now concerned about the temperatures. 64C cpu 40C motherboard 32C hard drive 40 AUX - is this my radeon 9800pro ? thanks.

i didnt put any on , i thought i didnt need to since there is a thermal pad on the heatsink already. i just played a game for a bit and cpu is going up to 64C and motherboard is 40C.. mabey i just have a hot room... my old 1.2Ghz was running at 80C on processor instalation, i tried to get the...

thanks Viper96720 , il try to get another instalation cd any other opinions / ideas ? edit : no more needed im a n00b anyway , i cleaned the cd with my hand and then it worked. insane

im having trouble installing windows xp home from the cd. I get to setup , it goes through the "setup is looking at your hardware" thing.. but when it tries to send the files from the cd to the hard drive this happens..... first few files (lets say 8) , get coppied succesfully, then the next...

sorry Gigabyte 7N400E-L xp2500 barton , not oc'ed yet crucial pc3200 512 sapphire 9800pro nothing at all on the hard drive. power source , came with case , hope it will be ok :S EDIT , i can get to the bios , as far as i can see EVERYTHING IS FINE,but the pc speaker keeps humming. should i...