Recent content by kansaslawguy

Awesome, when I get back home I'll post the results.

I used the Big Typhoon, it worked great, and installed easily.

I can't seem to get that stability test to run. It keeps saying it is missing Worker.DLL or something of that nature, so I haven't been able to stress load the system. But I played Oblivion and World of Warcraft for a bit last night, and the system showed no signs of error. If you have an...

So, since I'm running my FSB at 333, once I downclock my memory to 666, I have effectively removed the divider. Correct?

What setting removes the divider in the BIOS?

Ok, these are my readings with CoreTemp, under your suggested settings: TCaseMax: 85 C Core #1: 44 C Core #2: 43C Are these at acceptable levels? Speedfan #s: Temp1: 41 C Temp 2: 27C Temp 3: 56C HD0: 31C

This is the area where the max value can be 450 correct? If I set this to 333, it pushed my memory way up. I scale that back down manually?

Phil, my Jumperfree area, it doesn't say FSB, it says CPU. Set that at 333?

Great! One other question. What is the easiest way to monitor my CPU temp?

Alright Phil, next question! Which setting overclocks the 6600, and what is a safe minimal overclock if the processor has a TT Big Typhoon on it?

Alright, I'll give it a try. Thanks for your help :)

Phil, you are the man. I'm having an issue with my memory. I'm using the Corsair 5-5-5-12, XMS2 2x1024 DDR 800, but it is showing up incorrectly. Where in the BIOS can I set it correctly?

Can you recommend any simple errors to watch out for that you might have overlooked on your build? Places where you set a jumper or fan incorrectly? Also, has anyone used a big typhoon cooler with their 6600?

Hello all, I'm doing my build right now, and on Page 2-9 of the motherboard manual, it says that when installing a dual core processor, you must connect the chassis fan cable to a few different places. The chassis is obviously the case, and I'm guessing the fan cable refers to the main...

I know the wattage on the PS is low, but I think 550 ought to be sufficient for minimal overclocks?