Recent content by Justen

Ping www.nike.com although your router may not be set to allow pings. Also check your proxy settings in IE. Tools menu/Internet options/Connections tab/Lan settings. I would say to clear everything in there.

How about this? Technet

Have you tried "Standard PC" With LiLithTecH's instructions? Uniprocessor could work also.

Try running mmc.exe, then File menu, Add\Remove Snap-in, Then click on Add button, Choose the snapin, click Add on that window then close, then OK on the last window.

Boyho1, Hold the shift key when right clicking on the file and you will get the 'Open With'

You sure you have the gateway in TCP properties set to the IP of the router?

Heys Arch Paste it into Paint or some other graphics program, instead of Word, then File menu/'Save as' and change 'Save as type' to whatever you want.

The old ways still hold. Strip it to base configuration and try it. Even try another vid card if you can. Also try the different HD controllers. Then add one componant at a time until the problem resurfaces. My Pro II S runs sweet clocked to 2.81GHz. I adjusted the Vcore to 1.525 so the actual...

I don't remember if it can be done. I would search the Technet knowledge base for changing boot device driver. Here is one I found. Also www.windowsreinstall.com is a good place to look. Try plugging it into the other Primary IDE connector too maybe? Good luck.

Which port do you have your HD connected to? If its the yellow (Promise controller) one, did you press F6 when you started the XP install and load the Promise drivers?

I'm running the Albatron PX845 PE Pro II S also. Cost about $130 at newegg. Very happy with it. I have a 2.53 OC'd to 2.77 , lapped Intel heatsink, reporting 46 degrees in UT2003 (is that high?) and 38 otherwise in MBM, running Corsair 3500 at about 385, 2-2-2-6. No problems at all, except 24"...

I second that. I am waiting on this review before I start. Tom's has one already but I am looking for a second from Anandtech.