Recent content by jronald

Guys, Im looking for a copy of the above bios, Im sure someone has it. With the Braziliantech site down Im having problems locating it. It should shave 5 degrees or so off my idle. Thanks Ron jrserviceatbellsouthdotnet

I have a 133 final rev. board (1.05 I think/it is the final rev. regardless) Has run a 1.3 Duron for at least a year. The Duron was a PITA to set up and forget about using the jumperless settings. In hindsight I think it was underclocked at 100mghtz. Switched to a 1900XP and once again attempted...

I purchased this Dell OEM card for a machine and I am trying to come up with the pinouts to the frt panel Here is the best picture I have seen http://tekgems.com/Products/creative-ct5807-sound-card-pci.htm Long white connector on the end nearest the header. Thanks for the help

You can also partitcion the drive down to an acceptable level for the bios to see, On many P1 systems this was as small as 8gig, I have never attempted running that many parts. on a drive that big...in therory it will work. Ron

Opps left the link out http://www.directron.com/acercase.html Sorry Ron

Try this case And any Micro-ATX board The case is rugged as hell...very well built Will hold 3 HDDS, 2 CDs and a floppy, It is half the size of my stereo amp. 2 draw backs It is White and Blue (not beige) And the frt panel connections will need to be cobbled together. Runs a high end Celly...

I am not trying to push anybody's product but after SEVERAL attempts to network 98SE machines I was about to give up. I then stumbled accross a copy of XXXXXX's (ryhmes with smell your kin) "Desktop Network PCI Card' manual. Worked the first time I tryed with these instructions. All kidding...

If memory serves me voltage AS LONG AS IT IS HIGHER is not critical, however the higher the voltage the larger the cap. If you cant find a 1800 an 1700 or 1900 will work. A 1600 or a 2000 might work and so on. Ron

Want to see what is REALLY running? Try this Start/Run/(type)msconfig punch the startup tab The only things that MUST run are SYSTEM TRAY and REGISTRY Keep in mind the more things you uncheck the duller the system gets If you are into file sharing there are atleast 3 items PER type...

Windoze 98se Ron

I spotted that also, I was hoping that someone had stumble upon the HP link hinted at on the same website. Ron

OK I hate to admit it but i own one of these, it was a gift thought to be junk. How do I remove the splash screen, I know that the windoze screen can be fixed via regedit. Its romoured that HP used the cognac board in a few of thier machines but I have not found the proof. If this is indeed the...

Nichicon is a brand name, match the numbers on the side and your good to go. If you need a Xerox copy, it MUST come from a Xerox Copy machine If you need a cola, is it a Coke, Pepsi, R.C., or Sams Club. Match the numbers, Radio Shack most likley Ron

I was able to solder a fine wire to the HD then to a replaced, much shortened pin (donor from fried HD) mounted in the correct hole and glued in place in the socket. I then wire tied an IDE cable to the HD and have had no problems. It is not very sexy BUT it salvaged a 40gb HD. GoodLuck Ron

I am looking for a VERY small Micro ATX case. Would like no more than 13" deep. Has anyone stumbled on one lately? Thanks in advance