Recent content by jimbob91

  1. J

    Difference in RAM overclockability based on CPU freq?

    Well, I did some more testing. At 260FSB x 9 =2340Mhz Prime95 stable for 24 hours. Memory is running at 218-19 via 166 mem divider (1/11) as the BOIS displays, but by calculation at CPUZ say about 213. I did quite a bit of testing at 263FSB. This only raises the memory a little (220 at...
  2. J

    Difference in RAM overclockability based on CPU freq?

    Might be an interesting test ... I'll try giving the Sempy a little juice earlier that it needs,and see if I can run the memory higher. Checked out the OCZ booster, but I don't think it is compatible with this board. Thanks for the ideas!
  3. J

    Difference in RAM overclockability based on CPU freq?

    First off, system specs: Epox EP-8KDA3J with Sempron 3100, 512 meg ram (2x256 Mushkin level 1 2-3-2) The Sempy will hit 2.38Ghz at stock voltage stable, and 2.47 Ghz at 1.5-6 volt. What I noticed: I could reach 230 FSB stable with the Muskin RAM @ 2.7v, using prime and memtest. Much...