Recent content by jhego

Ok, it's now official. My OC will permanently stick to 3.4 @ 1.375V. CPU FSB @ 1.3V. IntelBurn 30 out of 30 passes. Max temps of 72C. http://img521.imageshack.us/img521/512/q6600qx4.jpg

I have the eVGA 780i SLI Specs: Antec Nine Hundred Q6600 G0 @ 3.40 (378x9) 1.4V w/ Xigmatek HDT-S1283 eVGA 780i SLI GSkill DDR2 2x 1 GB PC2-6400 Visiontek HD4850 512MB OCZ PowerStream 520W 160/320/400 Seagate Dell 2405FPW Windows Vista 32-bit

Thanks for the suggestion. My case side cover was on when i was doing the test. I also tried reducing the voltage but by big increments and it became unstable. I'll try reducing it just a tad bit to find my lowest vcore. However, do i leave my CPU FSB voltage to 1.4v? I see that there only...

Lol, i tried the Intelburn test and failed right away. So i dropped it down to 3.4 @ 1.4 and passed 20 out of 20. This program also shot my temps to 75c !!! I'm using a Xigma and i would like to know if i will need to re-seat the HS? Cuz that will mean i would have to disconnect everything...

Hehe, not that scared. I'll try OCCT as well. I dropped the vcore to 1.38 and so far so good.

Man, i'm scared of that Linpack. Hopefully my PC doesnt blow up :P

Hi guys, i finally built the rig last night and i'm now testing the stability. I managed to get to 3.6 w/ 1.4v and core 3 crashed. I believe i could make it stable but i don't like going more than 1.4v. Changed the settings to 3.5 and so far so good. I'm somewhat content with the speed. But feel...