Recent content by JenniCHP

Posted a follow up in another thread..it seems when I take one stick of ram out I get everything just fine..the boot up screen, etc..but when I have both sticks in, nonstop beeps (signals ram problem) and no bios.. I'm fairly sure I have them in correctly. I'm wondering if I need to boot up for...

Aha..ok..I tried taking out one of the ram bars and it works. It reads 1 gig of ram, I see the bios set up..a quick beep and it says pc bus 200mhz (That doesn't seem right? Isn't it supposed to be 800 or something) .. anyhoo I can hit delete to go into bios set up...so it has to be...

First - thanks in advance for everyone who's been able to help me get this far, so far.. I've been noticing that the motherboard emits a beep over and over - nonstop. The motherboard is GIGABYTE "GA-K8NSNXP-939" nForce3 Ultra Chipset Motherboard for AMD and I believe it's an award bios -...

Now I'm worried, MechBgon - maybe it's just something silly like with the power, maybe I'm doing the jumpers wrong..but all I've been getting is a black/bank screen. The motherboard makes an intermittent beeep..(silence for a second or so), beeep (Silence for a second or so) beeep..repeat -...

regarding worms - I have a linksys BFRSR41 or something model Router. Reason being so that my folks can have access using the same cable modem in their rooms. I'm fairly sure that the router (set on its toughest settings. Will keep wormies from getting in? Also - regarding the boot up -...

Holy ..uh..sorry guys.. I uh.. I mean.. I forgot about the power button in the front panel. Oh man....I'm so sorry about that. Sometimes it's right under the nose. Thing was - I was doing the button in the back - never did the most obvious thing. I guess I'm just so darned nervous about...

The motherboard is on the case it came in - yeah. Got the ram in slots DDR 1 and DDR 2 for dual channel capabilities. Now the video card in it is my ultra old $X AGP Nvidia GeForce2 MX with 16 mb vram ..it's a darned old card...could that be why nothing is working as far as power supply goes...

Picture of the rear of the power supply ---> http://img23.exs.cx/my.php?loc...amp;image=DSC02265.jpg I've tried flipping the big green switch once the power sw cable is connected..not a stir of life. The little red thing says 115 and i can switch it down and it gives me the # 230 ..I...

More pics - shows the 2 power connections plugged in, just for reference. http://img45.exs.cx/my.php?loc...&image=DSC2264.jpg

Sure did Mech - that one and the longer one with much more connectors - can't think of the name exactly but I have *both* of them plugged in. ;)

MechB - so as shown in my pics - if connect that power SW cable over the two pins highlighted in your picture - the two reds - then the power supply should light up/activate when I turn the button on? I've tried that and it hasn't made a bit of noise at all. I have a video card in - the ram...

Sure! You guys are so sweet to offer to help me - it's the *least* I can do! I'll try to accomodate any requests you guys ask of me. Here's the pictures of the F-panel, me holding the power SW connector, and the mobo info booklet with the necessary info on the page. Keep in mind I've *only*...

I don't want it to seem like I'm not looking at my booklets - I am, trust me. I have the page right here that shows the F-panel - ie where the speaker pin goes etc etc..but the color coded doublepins confuse me - as does the + and - = sorry about this guys, I'm pretty new to the whole deal...

GIGABYTE "GA-K8NSNXP-939" nForce3 Ultra Chipset Motherboard for AMD Socket 939 CPU -RETAIL Link/pics --> http://www.newegg.com/app/View...=13-128-254&depa=1 I just feel bad about talking too much on here because I don't want to bump my stuff up above other people that may need more...

Whew! Gosh..I was really worried there. I'm guessin I don't have the 'SW power' connector plugged into the right pin setting on the F Panel thing. I'm online - if there's anyone that's available for a bit of free time and feels up to helping me with this - I'm on ICQ as 93127116 or aim as...