Recent content by jeffwads

Nice. Crest anyone? I have a small cpu fan on top of my chipset heatsink that is doing very well.

Setup: P5W DH Deluxe E6600 OEM A-Data DDR2 533 2GB kit Running at 3.3Ghz (370 FSB) at 1.45v. Temps are 33C idle and 41C Dual Priming. I simply do not trust Coretemp on the Asus board due to its temp being 20+ degrees C over all the other utilities. The Z fan base is lukewarm at best...

I get some crazy temps with this tool. At full load, 66 and 64C on a E6600. Every other temp application I have shows 44C. This is highly suspect and needs independent verification IMHO. With this kind of heat, I may simply get rid of my central heating system and run Crafty 24/7.

Just for the record: I have the same board/CPU using A-Data 533 memory 2GB kit. I currently run at 3.33Ghz with Vcore at 1.45 set in the bios. Memory is 1:1 (5-6-6-18-24) Freq 370. The ram gets a 2.00V in bios. FSB is 370. This system has been stable for almost 2 days now under a pretty...

For the record, I am the one that Jose above is referencing. Currently, I am running the E6600 at stock 2.4Ghz with a Raid 0 container using 3 WD Raid Edition 250 GB drives on the Intel ICH7R chipset. The driver for the chipset is the current version right off intel site and was installed...