Recent content by JD111

  1. J

    Is Power supply enough i5 3470 + GTX 650 TI Boost

    Typo in thread title , should be "Is my Power supply enough for i5 3470 + GTX 650 TI Boost"
  2. J

    Is Power supply enough i5 3470 + GTX 650 TI Boost

    Hi, Just ordered a GTX 650 TI Boost gpu My Complete PC specs are Intel i5 3470 ( stock ) GTX 650 TI Boost ( Ordered ) 2 x 8gb Gskill 1600mhz 1 tb hdd 2 x 120mm fans My Power supply is a Corsair CX 400 http://www.jonnyguru.com/forums/showthread.php?t=5583 , I was earlier running a ATI...
  3. J

    Core i7 870 , support for 1600mhz 8gb ddr3 modules

    Thanks for the replies, according to this http://forum.corsair.com/v3/showthread.php?t=112673 the motherboard / chipset does not support 8gb modules .
  4. J

    Core i7 870 , support for 1600mhz 8gb ddr3 modules

    Hi, I want to run 2 x 8gb 1600 mhz ram with my Core i7 870 & Gigabyte GA-P55 UD6 , can any 870 users confirm if this cpu supports 8gb ram sticks? The ram that i am going to buy runs at 1.5v @ 1600mhz but to run it at 1600mhz with 870 i will have to enable XMP , XMP runs the ram at 1.65v in...
  5. J

    1333 Vs 1600 ddr3

    I have i3 540 and MSI H55M-P33 , maybe something to do with the Clarkdale processor? When i enable XMP it increases the bclk to 160 from default 133.
  6. J

    1333 Vs 1600 ddr3

    I bought 2x4gb Corsair vengeance 1600 mhz , price difference between this and 1333 wasn't much so i bought this , Now i have a problem running this at 1600 , if i enable XMP to run this at 1600 it also automatically overclocks my cpu from 3 ghz to 3.6 ghz , i don't want to overclock the cpu...
  7. J

    1333 Vs 1600 ddr3

    Thanks
  8. J

    1333 Vs 1600 ddr3

    The old Ram will be used in a different PC , i wont run my old 1333 with the new Ram.
  9. J

    1333 Vs 1600 ddr3

    My system specs are i3 540 MSI H55 mobo 2x 4gb 1333 ddr3 I am buying another 2x 4gb Ram and will use the old Ram on another system , should i buy 1600 mhz or 1333 mhz , 1333 sells for about 60% of the price of 1600mhz ram here , so is it...
  10. J

    PC freezing/Black screen after installing new Sapphire HD6850

    I got the card replaced , the new card has been running for 6 hrs without freezing , looks like my old card was faulty , thanks everyone for helping.
  11. J

    PC freezing/Black screen after installing new Sapphire HD6850

    I cleared CMOS so everything in bios was at default settings , checked RAM with memtest , no errors I have XP /Win7 dualboot , earlier i was using Win7 now i tried running the card in XP with 11.4 drivers but it still froze , so driver isnt the issue I will update the bios and check again
  12. J

    PC freezing/Black screen after installing new Sapphire HD6850

    I dont have another psu , i dont think its a psu problem because , it usually happens when the GPU is idle , it froze twice when i was writing this post , all i did was log into windows and opened firefox and was typing this post when it froze , had to go back to onboard GPU to complete this...
  13. J

    PC freezing/Black screen after installing new Sapphire HD6850

    I played mafia 2 for 45 minutes , there was no freezing , but it has started freezing again, has happened twice, nothing happens when i press the reset button but after about 2 minutes the pc restarts on its own.
  14. J

    PC freezing/Black screen after installing new Sapphire HD6850

    Its not just the monitor signal that goes out but the whole system stops responding , i have installed 11.4 drivers now and so far running for 45 minutes i have not had any freezing , earlier was freezing after 4-5 minutes.