Recent content by ivansoup

Thanks for the replies and help. Yes, I am trying to keep the temps down. I'm sure the chip could do more, but I think I'm happy with the current overclock given my cooler (cooler master 520).

I tried posting twice before, but apparently I was doing something wrong. I am using a EVGA p55 ftw motherboard. The system was stable at 3.73 Ghz with 1.15v vcore and 1.05v vtt. 100% load core temperatures on intel burn test were between 65-69. I also ran prime95 for a few hours. I upped the...

I posted a reply earlier, but I guess it didn't send or something. Anyway, I'm using a EVGA p55 ftw motherboard. I tested with intel burn test, and it was stable at 3.73Ghz (28x133) with 1.15v Vcore and 1.05v VTT. The max temps on cores were 65-69C during Intel burn test. I then upped the...

I tried the intel burn test. The system was stable @ 3.73 Ghz (28x133) w/ 1.15 v vcore and 1.05v vtt. Max Core Temps under full load in intel burn test were between 65-69. To be safe, I upped the voltage so vcore=1.1625v and vtt=1.1v. My question is does the cpu vtt have any effect on...

Thanks for the reply. Yes, hyper threading is enabled. I manually set some of the other voltages to what I thought their default was. vtt=1.05v memory voltage=1.5v pch=1.05v pll = 1.8v

I have an i7 875k with a cooler master hyper 520 heatsink/fan I recently overclocked to 3.725 Ghz. Idle temps are 25-30C on each core. 100% load temps following prime95 or Linpack are 69-72C on each core. I only raised the multiplier to 28 and raised vcore to 1.2v. I didn't change vtt or any...