Recent content by india7

  1. I

    GA-945P-S3 overclock

    That's what i expected. But shoot! Another unsucessfull try: 266, 100, x2.0-, 4-4-4-12-15.6, +0.1VDIMM => no boot, fallback to default values. 266, auto, x2.0-, 4-4-4-12-15.6 => boot ok, Orthos fails after a while. Best result so far. :(
  2. I

    GA-945P-S3 overclock

    Ok, the good news is i successfully booted at 266, 100, x2.0-, 4, 4, 4, 12 !! :) The bad news: Orthos prime95 stress tests failed quickly, and after some additional stress testing the screen suddenly went black and the machine rebooted. :( So i don't call this a stable overclock. I really...
  3. I

    GA-945P-S3 overclock

    hmm, not the success i had expected. these are my experiences so far: (FSB, PCI-E, Multiplier, DRAM settings) 200, auto, 3.33, 5-5-5-15 - OK. (These are the stock settings, but forced instead of auto) 200, auto, 2.5, 5-5-5-15 - OK. 210, auto, 2.5, 5-5-5-15 - OK. 220, auto, 2.5, 5-5-5-15 -...
  4. I

    GA-945P-S3 overclock

    Hi tapir, thanks for the feedback! Will try this as soon as possible.
  5. I

    GA-945P-S3 overclock

    Hi tapir, can you please tell me what your settings are? I can't get this board to overclock a bit! I have the GA-945P-S3 rev 1.0 and BIOS F4 and an E4300. I set FSB to 266, memory to 2x (=>533) - my memory is noname but DDR2-666, so i don't see a reason it would not work. But everytime i...
  6. I

    Question about Dual Channel DDR2 RAM

    Hi, Concerning Dual Channel and DDR2 RAM: is Dual Channel a feature of the mobo chipset only or do the RAM DIMMs have to be Dual Channel enabled also? I´m asking because i thought it was a mobo chipset feature only, but i saw some DIMM offers stating explicitly "Dual Channel" or "Single...