Recent content by imported_SeeFu

I thought once u updated to the latest bios there was nothing hidden within the bios setup.

u konw what's wierd is i have it all turned off, but cpu-z still says that my processor is flipping between x6 and x8 multiplier so I dunno. I'm at 1700 mhz bus, 3.4 ghz

NB at 1.275 vcore +0.25 - bios vcore shows 1.072v - cpuz no load vcore shows 1.280v - cpuz w/ prime 95 after 1 min on small eft test i can go up to 3.8, but i'm just keeping it at its current setting. try going up to 1700. mine wouldn't post between 1550-1675 (somewhere in there...

i've running my e7650 @ 3.4 for about a week without a crash now. had to up vcore and nb by 3 steps. it's been fairly cold so i can't really judge how hot things are running fairly.

yea. i've barley increased it over stock. 3.4ghz is fine w/ me though. it runs everything i need at that point.

I still have .2v to go before i reach that limit.

CPU-Z still shows my vcore voltage at 1.288, I keep wanting to push the CPU so much harder since I have a lot of vcore to go before i hit intels termal limit.

My E6750 @ 3.4. vcore and NB are bumped up 2 steps. core temp under no load is ~30C. Under prime 95 it stays around 55C. was prime95 stable over night.

My m/b died about a week ago and newegg sent me a replacement. This new one runs MUCH cooler. E6750 o/c to 3.4. NB was bumped up 2 steps as was vcore. core temp reads ~55C under load with prime95. With my first m/b I would be in the mid 60C's

My m/b died about a week ago and newegg sent me a replacement. This new one runs MUCH cooler. E6750 o/c to 3.4. NB was bumped up 2 steps as was vcore. core temp reads ~55C under load with prime95. With my first m/b I would be in the mid 60C's

COOLER MASTER RR-CCH-L9U1-GP 92mm Hyper TX2 CPU Cooler - Retail http://www.newegg.com/Product/...p?Item=N82E16835103031

temp under load without overclocking was around 57C

I'm running a MSI P6N Platinum board w/ the E6750. I can get it to 3.6ghz, but when I get it to that speed, my processor core temps rise to 67C. What's interesting is my vcore under cpu-z is never above 1.325v. Is this normal?

So it looks like I can hit 1800fsb w/ a .05 vcore increase and NB at 1.4. What's interesting is my load temp gets to 67c, but the vcore shows under 1.325 at all times. is this normal to have such a high processor core temp, but with a vcore that doesn't show much increase over stock?

what temperature can i take the G0 e6750 up to?