Recent content by imported_rz

After using memtest86 my system won't boost past "verifying dmi pool data", it just sits there. Is this normal.. ?

Well, I'm not sure. It says 4-4-3-5 on the modules.

48-52c, it varied. I tried 450 FSB, machine would not even boot. Now that I've set the memory multiplier to 2.00 with 400 FSB, Prime95 fails on the first test.

So I oc'd a e4500 to 3.2 on a P35-DS3R with GSkill DDR2 800's rated for 4-4-3-5, I've got it set to 400x8. This is my first OC, I pretty much used Regalk's post as a guide. My Vcore is at 1.34 in bios, cpuz says its 1.312. I've got my memory multipler at 2.50. Don't know if you need the info to...

Thanks :) Seemed obvious, but I just wanted to make sure.

I have a AC7 Pro being shipped to me tomorrow. I've read it comes with MX-2 pre applied. I've also read MX-2 is better than AS5. My question is, should I wipe off the MX-2 and put AS5 on?

You have no idea how much you just helped me out by breaking all that down for me. Going with the 800, mainly because of my budget atm. Thank you!

I'm currently building a system based on the P35-DS3R mobo. The mobo supports 800 and 1066 DDR2. I'm aiming to have an E8400 OC'd to 4GHz in this board. I've never really OC'd before so I'm not sure which to get. I've read if your going to OC you should have 1k+ but I also see folks with systems...

n7, I just want to thank you. I've decided to go ahead and start building my next system. I was going to wait a few months for the new video cards to come out to start on it and make my switch to Intel. What I'm going to do though is build a cheap system that I can upgrade in a few months...

Thanks for the reply and welcome, been a lurker for sometime. I won't be buying a whole new system, I already have a high end system. This AGP card is for a 2nd system. I don't have a need for 3 systems. This system does fine doing what I need it to do, theres no reason to upgrade the entire...

I'm upgrading a 9800 Pro in a Athlon XP 2.0ghz machine with 2GB of ram and a 400w PSU. I've been trying to find a x1950 Pro to upgrade to but I can't find one thats not $300. So I started looking into HD2600XT's but I've learned that there are several issues with drivers for those cards, so I'm...