I recently purchased a Dell Inspiron 9300 after my old Inspiron 3200 finally kicked the bucket.
I have to say I am totally happy with my purchase and at 1600 dollars it was an awesome deal. ( I had a code for 800 off and 100 dollars off for a instant rebate)
Some of the specs:
17"...
I don't think there are any mainstream PC Video cards right now that offer Dual link DVI on a single port capable of supporting 2560x1600. (I could be wrong though)
Well the 3Dlabs Wildcat Realizm 200 does but that card is expensive.
Edit: Typo
VisionTek x800xt with Ati Silencer 4 @ 555/550 (1100)
Idle - 39c
Load - 60c
And I could go a bit higher also ..well according to ATITool but there is no need at this point.
yes you void your warrenty if you remove the heatsink/fan
Edited: added new temps, tightened down the heatsink.
Okay from what I can tell. The below is a picture of a 6800gt agp
6800gt
The following picture is a close up of a 6800gt pci-e board. (note the HSI bridge chip under the core)
6800gt pci
From what I can tell there is no difference in the mounting holes or the memory. The only...
Well I use the ATI Silencer 4 now on my x800xt with no problems at all. I am not familar with the zalman cooler so unfortunately I can't give you a comparison of the coolers.
The thing that I like about the Silencer 4 is that it has a bracket that cools the ram chips on the other side of...
What are your system specs? For example, make and model of your Motherboard, things like that. Could be quite a few reasons for the blank screen. Without more info its impossible to help you.
Edited for spelling
Well if your getting a 6800gt then you can really play with that card.
Heck you could do what a friend of mine did. He just slaped on a 80mm fan to the top of the passive heatsink. Basically he just took some long cable ties and secured it to the card. It worked and the 9200se...
I would take the passive cooler off, apply some good thermal paste, and add a active cooling solution. I would only do this if you had the parts laying around.
You need to just go out and get your self a OEM 9600 for like 80 dollars. That would blow the socks off the 9200se. Also it...
Well the only reference I could find to a 9600Le was on ATI's website stating that ABIT made a 9600LE with 256mb ram. But searching ABITs site I couldn't find that perticular product. Kinda weird.
There seems to be alot of foriegn websites mentioning both a 9600 Le 256mb version and a...
Hmmm I thought Dangerden had water blocks that will fit 6800 series cards. Do the new PCI-E cards move the mounting holes around or is there other obstructions that prevent the 6800 series water blocks from working?
Wow I could see how you could think it was a pny mx400. It looks very close. But the heatsink/fan is different and the chip that is between the heatsink and the front of the card is in a different position than the one in the pic.
But again the picture is too low of res to really be...
Well I am assuming your talking about the video card 3rd from the right.
Looks like an Nvidia lay out but not sure. Early geforce boards used to have that L shaped memory lay out like that.
But identifing the board from this picture will be next to impossible unless someone actually...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.