Recent content by imported_LandShark

  1. I

    the tube is very difficult to squeeze onto the noozle

    i have 2 temp sensors working. one is attached the side of the CPU block near bot. another one is on hte case to measure ambient temp
  2. I

    the tube is very difficult to squeeze onto the noozle

    thanks for the replies guys. my system is now running. the water temp is around 37C, but Core Temp reading is 15C higher
  3. I

    the tube is very difficult to squeeze onto the noozle

    koolance all 3/8 ID boozles, tubing is 3/8 ID also all blocks are koolance's after i squeezed the tubing onto the noozles, it fits very tight and secure. maybe i shall use some distilled water to lube the tubes?
  4. I

    the tube is very difficult to squeeze onto the noozle

    i have PVC tubing, and it is very difficult to squeeze onto the nozzles. if i install the blocks first, i wont be able to get the tubing fitted without damaging the mobo. my current plan is to measure the length, then cut and install the tubing to the blocks, then install the blocks to the...
  5. I

    Water Cooling, flow rate question

    so far, i am running a mini loop outside of my case. i accidentally fried my mobo and am still waiting for the replacement via warranty im confused by those 3 fans on the top. it looks like those fans are gonna blow air downward because the directions of the blades, but in fact, they are...
  6. I

    Water Cooling, flow rate question

    it is an external kit, exos 2.5 info is here http://www.koolance.com/water-...nfo.php?product_id=668 , pump, rad, fan control are built into 1 single unit which sits on top of a case. i have hooked up all the components, and currently running it at the lowest speed. but the air bubbles just...
  7. I

    Water Cooling, flow rate question

    thanks for the replies, guys the pump is Pump, PMP-400, # Maximum Flow Rate: 8.5 L/min (2.25 gal/min) # Maximum Head Pressure: 4.6m (15ft) # Motor: Brushless DC, electronically commutated, spherical motor # Power Consumption (at max): 18W my hardware, C2D Extreme 2.93GHZ, Geforce...
  8. I

    Water Cooling, flow rate question

    i bought a complete system from Koolance with 10mm ID everything is ok, except the waterblock for cooling SB chip, the CHC-125 here is the picture http://www.koolance.com/water-...es/more/chc-125_p2.jpg as you can see, it has a 360 rotational sockets, but the ID of the socket is only 6.5mm...
  9. I

    Goldfarming - Why China?

    before you judge China, or any other country, go there, and take a look yourself check out this video, it was made by a Canadian http://youtube.com/watch?v=uQhDll880Y4
  10. I

    is OS X Leopard good for gaming?

    i dont know anything about this OS, im wondering if it is good for gaming. Microsoft made Directx 10 exclusive for vista, but i dont wanna buy Vista Moved from PC Gaming to All Things Apple-PC Gaming Moderator DAPUNISHER
  11. I

    High Latency when playing World of Warcraft

    update windows with all existing patches try another computer with the same router. or take your computer to a friend's house to check if your computer is the problem
  12. I

    High Latency when playing World of Warcraft

    you didnt answer my questions
  13. I

    High Latency when playing World of Warcraft

    is WOW the only application, which requires internet, running? are you sure there is no one else using the internet? are you downloading with BT? uploading?
  14. I

    4GB SD card problem

    you are right, my friend's reader reads the SD card with no problem. Mitsumi sucks