Recent content by imported_bluedart

My system comes up with a RAM error on the Diagnostic bracket (all red except top right is green). This flashes 7 times and then posts fine. But is very annoying. I have tried reseating my ram, and testing it with MEMtest. Ram tests fine, but I still this problem reoccurs. I just replaced my...

My system comes up with a RAM error on the Diagnostic bracket (all red except top right is green). This flashes 7 times and then posts fine. But is very annoying. I have tried reseating my ram, and testing it with MEMtest. Ram tests fine, but I still this problem reoccurs. I just replaced...

Thanks man... it worked, one of the sticks was bad and one was good at 2-2-2... Sometimes it's easy to miss the obvious.

I want to know which board is the best board for me... here is my predicament: I have the following: MSI K8N Neo 2 platinum 3000+ @ 275 FSB x 9 (2.47 GHZ) 2x512 Ballistix PC3200 @ 183MHZ (2/3 ratio) 2-4-4-10 Enermax 420W Noisetaker HTT 3x / Stock CPU voltage Geforce 4 TI4600 As you...

I am trying to overclock my 3000+ Winchester, I am able to get at 275 FSB (2.47GHZ) stable, but I chose the wrong ram, (Ballistix) and am unable to overclock synchronously (1:1). In fact, when I put my ram ratio to 133 (2/3 ratio) my ram is at 183 FSB. I cannot run my Ballistix at 2-2-2-6 or...

How long should I keep Memtest x86 running before my memory is "stable"...? 3000+ 2x512 Ballistix PC3200 MSI K8N Neo2

Alright guys.... Here's my last attempt at overclocking with ballistix and my 3000+... I have a problem though... My system halts at the following screen while booting: NVIDIA RAID IDE ROM BIOS 4.60 Detecting array ... This is while attempting to run: CPU: 2.2 GHZ @ 247 FSB...

Okay... I was just wondering how far you could go at 1T. I figured you could even surpass Anandtech's top 1T FSB of 278... But I guess not. Thanks...

If you can clock BALLISTIX as good as or better than anand's, why don't you run your setup 1:1 at over 2.5 GHZ it would probably be faster than running it like you are now w/ 5:4 ratio. I wish I had your stix... :) Mine are very poor... now I am running at 250 FSB mem 200:166 with ram @ 208...

I was just wondering the same question... Reviews are coming in, and it looks like MSI has put out a good board with the K8N NEO 4 Platinum. Alternatives are Chaintech, Gigabyte for now... We will see the options unfold soon. If I find a good board I will be sure and tell you.

I was just wondering the same question... Reviews are coming in, and it looks like MSI has put out a good board with the K8N NEO 4 Platinum. Alternatives are Chaintech, Gigabyte for now... We will see the options unfold soon. If I find a good board I will be sure and tell you,.

What is the best NON-SLI PCI-E motherboard for Athlon 64 that will be out in the next month???

Rigs, here are the numbers from my Ballistix: How do you tell the date of production? #1 CL11145.G3 47072 #2 CL11145.G3 47072 Thanks for all the response to this topic... so I guess nobody has had any luck with Ballistix like Anandtech has had... Nobody is getting even close to...

I am trying to get my system stable with a descent overclock here are my specs: MSI K8N NEO 2 AMD 64 3000+ 90nm (winchester) 2x512 Crucial Ballistix UATA 160 GB 8MB buffer Western Digital 7200 RPM Enermax 420W noisetaker power supply First, just a note, I started out with a 2x74 GB...