Recent content by hertz9753

Hi, I have the same motherboard that you have. In the bios go to advanced and enter. Enter into the north bridge config. Memory remap feature should only be enabled when you have a 64-bit operating system. Waiting for my "compatible memory" that will cold boot without BSOD mem dump.

Have you tried the 1201 bios?

ddr 400 runs at 200 because it is DOUBLE data rate.

When was the last time that you cleaned your case? All the fins fans and vents.

When was the last time you cleaned your fans and cpu heatsink or the inside of your case?

Kits are an actual item. They usually come from the same manufacturing run and are guaranteed to run together in dual channel mode. Another stick of the same memory you are using should work if the newer stick still has the same timings and voltage.

I would go with the oem vesion without the games for $70.00

I would try unpplugging the power to the router or modem and plugging it back in with the computer off.

Click on the address above and then click on pc support. Under desktops choose Advent. After that follow this list. Advent T9000 series, Advent T9x02 series, Advent T9102, Hardware, MS 7046. I think you should be able to find drivers here.

http://www.pcservicecall.co.uk/layout.aspx?ID={75b3f34c-5252-4942-a1df-fa7c85cbe60b}&CatID={efbd62b0-1eae-4cda-a5f8-ce9a34045e87} Most of the the things about this mobo seems to be written in german.

You could try a search with the ethernet model number.

I agree with Dopefiend. Sometimes you just a hit wall. My xp 2500 Barton oc'd to 2.2 using pc 3200 and raising the cpu voltage, but know matter what I did after that I couldn't get it any higher.

Also turn boot other device off.

In the bios click on advanced bios features. Change first boot device to cd rom and dissable all others including swap floppy drive and bootup floppy seek. There should also be something called hard boot disk priority. Click on it and move bootable add-in cards to the top. Save changes and...

Try turning off power saving.