Recent content by Heligrin

Im curious how efficient/effective it is to use "auto" vcore voltage when OCing an i2500K? I left everything at default and upped the multiplier to 45. I prefer auto because of the benefits of low vcore while idling. Vcore whilst running prime95 = 1.28 volts (When i was at 4.3 with auto (1.24...

Hey guys, I just got my i-2500K with a gigabyte z68-UD3H motherbaord. Its seems as though every guide i look at recommends different settings to enable/disable? -Can i leave power saving options on? I hear SB is supposed to work with those on - CPU PLL (what exactly is it) -Multi load...

Freq: 3.9GHz Vcc: 1.840 -->1.360 load Temps: ~40 idle --> 57 load FSB: 432 Mem: 400(unlinked and manually set. A problem?) SPP: 1.45 MCP: 1.50 FSB VTT: 1.30 HT SPP MCP: 1.20 How safe is this overclock for 24/7 use? Are the core voltages too high? Thanks for the input! Also, my Vdrop is kinda...

eVGA 780i 2x eVGA 260 PCP&C 750W 4gb Gskill 8500 Vista 64bit e8400 Last night, i came ho,em and my computer, which was on, wouldnt resume from sleep mode. I pressed restart and the monitor turned on and showed that my system had hanged. When i restartd my computer it would post. It...

Thats stupid, that site i mean. My PSU isnt certified for dual 9800GTXs; however, it cearly performs under the conditions

Im trully considering stepping up form my 9800GTX KOs to 2 260s, which would only cost me abotu 180 bucks, however, i dont know if my PSU is up to it. My current system: PCPC 750W silencer 60A line E8400 @ 3.92 GHz 1.38idle/1.345Vload eVGA 780i @ 436 FSB 2 evga 9800GTX KO @...

Realtemp

That new processor is a conroe... That is an old arcitecture that was very bad imho. Your E6300 is much better

I just switched cases to an Antec 900 thus i removed my heatsnik (xigmatek s1283?). My idle temps with my E8400 at 3.8 GHz 1.352V are 33/36. What baffles me is that Core 1 never changes temp while in idle: stays at 36. whereas my other core seems to flucuate. When i load prime 95 up, both cores...

So after running prime for 12 hours one of my cores failed, however the other core ran for 19 hours. Now im in a predictiment... should i raise the VCore some more to 1.336 or should i jsut downclock? I really want to run stable at 3.8Ghz but my bum core 0 is preventing that. Also what does...

So im getting to the point where i dotn know whether or not its worth it to keep ocing. I have my E8400 Oced to 3.8GHz on my eVGA 780i Specs: VCC: 1.326 idle, 1.304 load FSB: 423 VTT: 1.3 SPP: 1.450 Ram: 507.7 Temps: 37/38 Idle ~52/51 load Now i dont know if it is worth it to run...

You see ill OC everything very high and still fail

Ive read all the guides out there and i am extremley confused at why my system wont become stable with such a small OC considering the gear im using. eVGA 780i E8400 Gskill 1066 ram 5-5-5-15 1T I cannot get the stem to be stable at a FSB of 373. No matter what voltages i try. Ill overvolt...

Hi, I have a eVGA 780i motherboard and was looking at the voltages because im ocing. I found a strange issue. When i select a certain voltage lets say 1.18 and reboot, it says teh current setting is 1.15. I did this with 1.23125 and when i reboot it says the actual voltage is 1.19 and when i...

THank you guys, ganna start OCing :)