Recent content by harbin

using ocz ssd for many years now. need more ssd!

ewiz now has extreme 4 in stock. Hope they can start replace the old with new B3 version. It's been too long without a wroking desktop!

i have p8p67 and x-fi music using the driver from creative site, working fine.

Peace, the combo at frys are gone....... forever.

Anybody got fan speed control working (via BIOS or via windows fan xpert program)? I tried both, none of them seemed worked.

The boot time is shorter on ext4 than P8P67

you need this: http://www.crazypc.com/products/5224.html

I am running ext4 on 1.40 bios. Everything is fine, got it run at 5.3g with 1.48vcore (1.465 in bios).

it is on bios 1.40

Asrock Extreme4 2500k

stay whereever you are now if you are happy. The internal pll overvoltage gave me asrock ext4 5.2g 2500k on air, but the vcore is not you will like.

This is different thing we are talking about. Leave this auto (should be 1.831v). There is a similar name option called"internal pll overvoltage" which only has 2 sub-options: disable/enable. Once you do that, you can o/c you 2500k/2600k like no tomorrow. You may have to flash to 1.40 to do...

I also have a problem on P8P67 Vanilla. When USB (2.0 port, not 3.0 port) mice ( 2 tried, microsft and dell) are in EFI, it will drift to left of the screen. But once in Windows, everything is fine. Tried 2 different BIOS, same thing. Weird.

I am not sure if you have done this: enable internal pll overvoltage in EFI.

I ordered the Asrock extreme4 over asus pro because: 1) The clear cmos button 2) The Debug LED 3) Cheaper 4) USB3.0 front panel 1 and 2 will be very handy for o/c.