Recent content by Hackendorn

  1. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Hey Nosleep, What brand of PNY memory do you have? I think I have the same memory but the 667Mhz version.
  2. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I up the Vcore voltage to 1.575 but Orthos still errors after 30 minutes. However, I am able to play BF2142 for several hours without any issues. I tried overclocking the settings for my memory clock speed to 750Mhz but it would not boot. I set the timing to 5-5-5-15 2T and the voltage to Auto...
  3. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    If I set my Memory voltage to Auto in the BIOS, what program shows me the actual voltage? The brand I am using does not have any specs I can refer to... 8(
  4. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    What are your settings to get 3.4Ghz? *Edited: It would be (425x8) = 1700FSB. But what are your voltages and other settings in the BIOS?
  5. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I was afraid that upping the Vcore would damage the chip. Is there a way to tell what is failing?
  6. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I am running at (400x9)=3.6Ghz with 1.5v Vcore, 1.563v for NB, Memory at Auto, and Vcore Offset at +100mv but Orthos errors around 22 minutes. What should I do from here? Temps: 42c for core and 34c for motherboard. This temps are from the Asus Probe.
  7. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Do you enter in the memory settings in the top or bottom section in the BIOS? Such as 5-5-5-15. Referring to page 2-27 in the manual or page 28 in the PDF format.
  8. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Can I get 3600Mhz if I have 667Mhz memory? Or does the memory factor in?
  9. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Ok, that is what I was missing. Thanks. I am curious what is the highest someone with the E6600 chip was able to go up to using air cooling and stable.
  10. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Hey Core2, I have finally got a heatsink on my sb and a fan on the nb. I am ready to start overclocking. I tried to follow the steps on page 92 but am not sure how to get my FSB at 400 using the 8 multiplier. The settings for the FSB show that 533 is the lowest I can set it. Need help getting...
  11. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Hey Core2, I bent the heatsink on the Freezer & trimmed the bottom left-hand side of the fan housing and it fits nicely. Now it blows the hot air out the back of my case instead up into my PS. Plus, it dropped my temp from 43C to 34C using AS5. I ordered the MX-1 and will post how much...
  12. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Core2, Do you have a pictures of the inside of your case and what you had trimmed off the fan housing? When I put it on the normal way, it seemed like the bottom of the AF7 Pro heatsink was touching the top of the NB heatsink. Also, is there a way to get more of the MX-1 stuff?
  13. H

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Core2, I just bought the ARCTIC Freezer 7 Pro but I mistakenly removed the MX-1 coating on it but I have replaced it with some Arctic thermal paste. My question is that in PC Probe displays my cpu running at 41C to 47C, is this normal? I have it blowing the hot air up into my 120mm fan for my...