Recent content by gurtzwei

Yes i have the power supply pluged into the Video card. Every other voltage level on every other device (that i can measure) is fine. Just this memory core voltage is low (all of the other voltages on the card are fine) I will try another connector into the card.. I hope the PS is not the...

I am experiencing some graphics lockups with my new Tyan Tachyon G9800Pro. I installed the Tachyon Graphics Monitor and found that the Memory Core Voltage is "Low". It sets at around 2.65-2.68v. The safe range for the card is listed as 2.7-3.1v (and i have seen images in reviews that put the...

I just built a system based off the Chaintech ZNF3-150 motherboard and an AMD3200+ CPU. I am having some problems with the onboard sound. First, I hooked up the "Face plate" device that allows me to plug a microphone / headset into the front of the PC. The microphone part of this works (but...

As per: http://www.mushkin.com/epages/Mushkin.storefront/40225fdb02e5a664273fc0a80102064b/UserTemplate/27 Up your tRCD rate to 1 above the RAM's rated speed. If you have 2-3-2 ran set it to 2-4-2. This cleared up my problems.

Just to give an update and to document the solution i found to my problem. I was using a custom Windows XP install set (slipstreamed in SP1 and $OEM$ directory drivers). Using this CD the windows installer will NOT read drivers off floppy. To fix this i downloaded the Windows XP floppy disk...

Yes. The only IDE device i have installed in the system is the CD-ROM drive. I know others are experiencing this problem because i can find references to it using google groups search, but none of those threads pointed out a solution either...

anyone? :(

oh and yes i have tried using a different floppy drive..

Windows XP always gets stuck when trying to copy the si3114.sys (and associated driver files) off the floppy. Let me walk you through my install first. Insert XP cd-rom and boot from CD-rom. Press F6 when prompted to load "3rd party raid drivers" I insert the driver disket when prompted and...