Recent content by Gundam

  1. G

    Possible to mirror 2560x1440 monitor with 1080p HDTV? (Only 1 will be on at a time)

    I have an Auria 27" that is running at 2560x1440 as my main monitor, and I was planning on adding a 1080P 39" HDTV to my room for a larger gaming display. Will it possible to mirror both without forcing the 27" into a lower res, assuming both won't be on at the same time? Or is it possible to...
  2. G

    Cat 5E/Cat 6 cable suggestions?

    All of my network cables have been from monoprice. However the last batch I got, only one cable was able to transmit over 8mb/s. I'm no networking expert but the way I tested them was hooked up my laptop to my gigabit router and transferred a 4gb file to my Unraid server. If results were slow...
  3. G

    Slow transfer rates when connected to switch?

    Ok I found the autonegotiation option in windows device manager for my ethernet port, but it's already set to that on default.
  4. G

    Slow transfer rates when connected to switch?

    Adapter in question: http://www.amazon.com/NETGEAR-XAVB50.../dp/B004DVEW8I
  5. G

    Slow transfer rates when connected to switch?

    As you can probably tell, I'm not the brightest bulb when it comes to networking. How can I set everything to autonegotiate. Im in windows 7
  6. G

    Slow transfer rates when connected to switch?

    TRENDNET TEG-S80G and TRENDNET TEG-S50g Don't really see much to set on the switch. No buttons or anything to set.
  7. G

    Slow transfer rates when connected to switch?

    Is there a special way I have to hook up the switch? Like specific port numbers are recommended for certain tasks? Or can you just plug in wherever you want?
  8. G

    Slow transfer rates when connected to switch?

    The way I have my network setup at home is as follows: Cable Modem>Gigabit Router>Powerline Adapter A> Powerline Adapter B>Gigabit switch>Laptops I have an Unraid server hooked directly to the router and it stores all of my files. What I'm trying to accomplish is allow my two laptops...
  9. G

    New build won't post

    GA-H55M-S2H i3-540 G.SKILL 4GB (2 x 2GB) DDR3 1600 (PC3 12800)
  10. G

    New build won't post

    Ok I think it's a bad ram slot even though the beeps aren't correct. There are 2 slots on the board. I've tried every combination and it seems that everytime I fill the slot closest to the CPU, it wouldn't post. I've tried using just one stick and loaded up both optimzed and fail safe defults...
  11. G

    New build won't post

    When system powers on, case fans spin continuously, but CPU fan spins for a second and stops. The system then beeps continuously (short beeps) and then shuts off. Nothing happens for about 5-10 seconds, then it starts the process over.
  12. G

    New build won't post

    This would be the closest match: Continuous short beeps: Power error I have the 12v and atx power cables plugged in, and i've tried using multiple psus, but still nothing.
  13. G

    Putting your OS on an SSD results in fast boots?

    SSD's are expensive, but they offer the most performance for the $$$ IMO. My celeron equipped netbook with SSD boots up and loads programs faster then my old gaming rig which was equipped with a e8400 @ 4ghz and caviar black drive. People spend ridiculous amount of money on the latest CPUs...
  14. G

    New build won't post

    Just built an i3 with gbyte H55 rig but i'm getting post issues. I've removed everything but the CPU and hsf and it still won't post. I've even tried a different psu. I get a bunch of short beeps
  15. G

    Questions about Silverstone LC13B-E

    I'll be receiving this case within the week but from what I can gather, the case only comes with two fans. There's an 80mm space and a 92/80mm space if you would like to add more fans. I would go with Scythe Flex fans if you're getting it from microcenter. Noise is a big issue for me, especially...