Recent content by GUN

warning warning ! Just got a new 2800+ and its multiplier is locked at 12.5 ! How high can i go on about 1.74V on asus nforce2 board ? im currently testing 183mhz * 12.5 and all looks fine.

Thanks chaps. Netbios ? ok what do i do to run it, and where do i get it. Thanks for the link Jack, i'm gunna check it out.

Bump

BEWARE ppl, this mobo is very specific with its RAM, especially at speeds of 166mhz and more. Stick to the ASUS list. I'm finally stable @ 194mhz with Kingston.

At these odds your OS has a greater chance of bombing out than your hardware. 24h prime and 2 loops of memtest is my minimum standard.

Win98se rox for me.

I give up ! I have 2 win98se and 2 winXP machines set up on a workgroup, connected via a 8 port hub. The win98 machines don't see any other computers in Network Neighborhood. All computers can be found when i use Find | Computer. The network printers also work. Internet sharing also works...

2150mhz (187*11.5) 1.75v 2136mhz (194*11) 1.7v mem and fsb in sync.

It could also be your memory that is failing when it gets hot. Try a memory cooling kit.

You cant set squat on the vm. I have 1 running my fax.

I recently installed a cheap new pure CU hsf from evercool, and it realy works well, for the price. The fan speed is also temp controlled.

Oh no, don't tell me the bartons are locked !?

Agreed. Run prime95 for a while. If you pass prime torture test for 24h, look at your graphics card oc or bus speed.

nforce2 ultra 400 chipset boards officialy support 200*2mhz fsb cpus like the xp3200+. eg. asus a7n8x rev. 2.0 You need a new mobo. Simply rip out the old 1 and put in the new 1 ;)

I get about 2150mhz max from my 2400+ Max. fsb ~190mhz. I can post and load windows at about 2200mhz but prime95 cant run for more than a hour.