Recent content by Fuzzy

OK...I spent over a freaking HOUR on the phone with the AT&T GSM/GPRS team...here's what they told me... This offer is available only for NEW customer, not current customer. The plan is available from AT&T's mMode (I think that's what it was called) team. They called the group over there and...

Univac - are the CDR-5W48 the same as the LTR-48246s? Thanks for the link to that article btw!

Colrenea - I think we are talking about that ones that are badged as CDR-5W48. If you follow the link at the post above it will mention that this drive particularly might be 48x24x48. The LTRS-48125W is spec'd out as 48x12x48.

Yay...I just picked up one at Staples B&M (btw in PHX there are at least 4 of them at the camelback staples store, all of them lite-ons) It's the CDR-5W48...anybody know if this is a 48x24x48 or 48x12x48 (i know what the box says - but the link from the above post suggests that this might be a...

Just a note...I just checked in the Phoenix, AZ area and here's what I came up with: Camelback/Biltmore - limited possibly 1 left Paradise Valley - 7 left Metro Center - 9 left Tucson - there are some left there, but did not get how many. I hope this helps someone.

Speedmonkey - yeah, I tried the 6.06 firmware, it seemed to flash....but it's still a sony. I also tried the 6.16....DON'T try it...it stops halfway and gives you an error. 7.52 firmware won't even recognize the card. I'm hoping someone here could shed some light on this....Help?

speedmonkey - I'm having the same problem...I can't seem to flash the card to the 7.52 firmware to be an orinoco....it's staying a sony at this point... Bugs66 - can you help? (or anyone else?) Thanks everyone!

All, Which firmware driver/program did you use to flash this card into an Orinoco? A direct link or name of the program would be appreciated! thanks.

I had one of these...I returned it...If you didn't like the JamCam, you probably wouldn't like this one either. The pictures qualities are not that great....but they're OK cameras to give to young kids to play with. Good luck.

Here's what I currently have on this BH6: Voodoo3-2000 AGP 3Com 590 network card Then I plugged in the 13GB Western Digital Caviar drive. The BIOS is set to auto identify the harddrive...still nothing. It basically says "NONE" for the hard drive and then it asks for a bootable...

KR, The drive is not seen by the motherboard bios at all. If use the WD BIOS program, it does see the hard drive....the bh6 doesn't see it. Did you have to do anything else to the WD drive for the abit board to see it? And does it come up identifed in the motherboard bios? thanks.

you're babbling is much appreciated! I think I have tried the NV route and it didn't help, but I will try again and will let you know. thanks for your help! any other suggestions? TIA

Please help, trying to get this system together.... I have an Abit BH6 ver 1.01, it's been flashed to the latest SS bios, per the docs on Abit's website it supposedly have been tested to see at least 40GB drive. I have two drives, both are Western Digital Caviar, one is a 13GB and the other...

narciarz, is your drive a 8432 actually an 8432E or 8435? If you got the 8435 to work with Easy CD or CDRWin...which version?? thanks.

I have to agree with stingygrrl, the new 8432 from creativelabs are 8435 - made by samsung, not plextor.. I also ordered one from staples during that other post and got it for $120 (shipped)- but it is a samsung. On the bright side - its a 8435 by samsung, which has 4 meg cache On the dark...