Recent content by finger-Shaun

...Great mind :hmm:

Thank you for sharing. Can I just replace the spring for harder one? It's really dangerous the pressure is too high as you described. :o

Wah, can you share that? :D I'm very interesting.

By the way, the fan wire clips of the VenoX are better than Mega, easy to put the fan on.

IMO, both of systems, installations and contacts are the same. :D But...When the VenoX was under the maximum pressure, it's still a little bit slippery, just a little bit. :hmm:

Yes!:awe:

:awe:

Wah, that post has so much combination. I did two fans of 2500RPM on VenoX. The conclusion is Mega needs less Ps than VenoX. If you have only one fan of high RPM, Mega is better than VenoX. If you have only one fan of low RPM, both are no different. ...I don't even understand myself. The...

Oh, thanks.():) Without a case, it's open and i7 975@ 4.2ghz, 156x27. Calibration was auto, and Everest showed 1.35v.

Almost finished in afternoon. I probed the ambient temp from the fans' inlet.

Thanks, I already did it, and I believe it depends on CPU because I had the same results. :(

i7 975: 1.30V(BIOS), 156x27 M/B: R2G Half inch above the inlet of both are 26~27oC.

VenoX with 1600RPM. VenoX with 2500RPM Mega with 1600RPM. Mega with 2500RPM. The 1600RPM is the stock fan of VenoX, and the 2500RPM is the Silver-stone FM123.

VenoX with 1600RPM. VenoX with 2500RPM Mega with 1600RPM. Mega with 2500RPM. The 1600RPM is the stock fan of VenoX, and the 2500RPM is the Silver-stone FM123.