Recent content by Fatbaggins

I'm not 100% about the nv6, but I am pretty sure that you will not fit the zalman under it...you can't under and nv5. I would do some measuring, if you look back through this strand you will see all the measurements that you need to know.

The dimension of that cooler are 37.5mm x 37.5mm x 32mm, so if you are going to use dual cards, and fit either NV4 or NV5 you are still looking at modding the fan unit a bit....32mm is about the max it could take without actually hitting the fan if the casing was cut away.

You would have to cut off over 15mm, which would in turn reduce its cooling ability to around the same as the NB32, so don't think you will get much gain out of that......

Micha....thats exactly what I was going to suggest.......that should just about fit under an NV5 or 6, but you will still need to do a bit of modding on the housing of the fan. and I am not entirely confident that the cooling will be suffcient either, guessit depends on how the rest of you rig...

No you cannot use the NB47J with an NV6....even if you modded the fan housing, it would touch the fan. I did try to measure this out, and consider each different angle I could insert the NB47J, but it just was never going to happen. You could get away with a height of about 32mm, but the...

Just in case your interested here is a couple of pics http://uk.pg.photos.yahoo.com/ph/keithb...net.com/detail?.dir=33c2&.dnm=a374.jpg http://uk.pg.photos.yahoo.com/ph/keithb...net.com/detail?.dir=33c2&.dnm=d3d0.jpg These were both taken before moving the fanmate, so now that cable runs...

Read all this post with interest...new to this(but not to computers), played about with my system, northbridge fan mental noise.....moved fanmate2 from CU7700 to the northbridge fan, enable Qfan....Cpu Fan still spinning silent and northbridge spinning at 5000 rpm(can reduce to 3000) silent and...