Recent content by falco1976

Not quite that good. It may be because I just seated it, but Im running about 52 - 54 on the cores. About 44 on the CPU. Dont know what else I could change. Any ideas, or does this seem to be about the best I can get?

Ok, Remounted HSF and temp is now reading 26 on CPU and 37 - 39 on the cores. I think this is more in line with where it should be. What should the load temps run? Again thanks for the help.

I have a CM 690 case with the front intake, rear exhaust, and side fans. I have mounted the Freezer using MX-1 compound. I had the same cooler and paste on an E6300 with no problems, but I may have put too much paste on this time or something. So is the consensus that I should remount the...

Ambient temp in room is 21 C. Running an Arctic Freezer Pro. Thanks

That is the lowest Vcore I can select in the Bios. I believe that is the default Vcore for this model, but I am not sure. Ambient temp is around 21. I understand that the typical recomended temp max is 60, but is that for the CPU or for the core temps? Thanks Again

I have the following configuration Q6700 G0 1.31 vcore stock clocks Abit IP-35 Pro Gskill DDR 800 HZ's OCZ GameXstream 600W Artic Freezer Pro When looking at Everest I see idle temps at CPU - 30, Cores 40 - 42. When running OCCT 30 min stability test temps reach CPU - 50, Cores 57 -...