Recent content by Dragonfly

I have an AMD TB 1,2 GHz running with a Taisol CGK742092, using the thermal pad it came with. I need more cooling, as it runs around 56C under load, and 50C Idle. My MB temp is only 30C Idle and 32C under CPU load. So i guess it's the circulation inside my case that's the primary problem ...

<< it is generally a good idea to put fans that dont have a monitoring wire (yellow) onto the power suppy connectors rather than the motherboard. if it does have rpm monitoring, you might be able to do a solder job and still use the power supply directly ;) if the fan is >4 watts, i'd say...

the 60x60x25 mm one. The place where i can buy one, they say it should be attached directly to the PSU, in order to not harm the MB, is this true ? My MB is a ASUS A7V133, can this MB handle that fan ?? Thanks in advance

I have a miditower case, and there is only space for a 80mm fan, so where do you install a 120mm ? Do you get a bigger case or do you make a 'smart' solution yourself ?

<< you could try another fan ... >> If you mean for the cpu i just have got a new fan on, the old one did it too. But since the temperature doesn't get higher, i think it's just the motherboard which stops monitoring for a few seconds (5-10).

<< what kind of mouse? win2k should autodetect it. u make sure that usb port is working? if not use the latest drivers off the web. pre-packaged drivers are usually older if not incompatible. >> Well Windows ME autodetects it, so i'm sure the USB port works. And it's a logitech ifeel mouse.

I can't make it work, I've tried to install the driver that came with the mouse (CDR). But it doesn't help, so how do you install a USB mouse ??? (In windows ME it autodetect). Any help is appreciated

Or at least so says PC-Probe (from asus). And one time i saw the +5v go down to 0. But wouldn't the computer stop running if there was no +5v ? And suddenly it just say that the fan runs at 0 rpms (where it did 4800 just before). I don't think a fan can decrease speed that fast (instantly). And...

I've got this system: ASUS A7V133 (motherboard) ASUS V7700 (geforce 2 GTS) 512 MB PC133 RAM (PQI) Maxtor 20,4 Gb HD (ATA100) ASUS 50x cd-drive sony 4/2/24-CDRW burner Creative Soundblaster live value (1024) AMD TB 1,2 GHz Taisol, made for 1,2 GHz CPU's (cooler) Well i can't run it at 133fsb, it...

I have this system: ASUS A7V133 Motherboard AMD TB 1,2 GHz 512 Mb PC133 RAM 20 gb MAXTOR HD When i run the cpu at 9x133 windows locks up, usually with a beep. If i run 12x100 it doesn't. I run Windows ME, can it be because ME can't handle the speed ? Or is it not a software problem ?

I've just bought a new heatsink (mail delivered it). But on the bottom-side. There aresome scratches, they're not very deep, and NOTin the middle (where the termal tape is, and where the cpu connects to the heatsink). So does it matter ? Anyway the cooler is a taisol (for 1,2 GHz CPUs). And the...

Well i don't know what the name of the powersupply is, but he uses the same one, and runs 133 at fsb, without problems.. Allthough not same motherboard, i've tried to raise my vcore, as high as 1.85 (default is 1.75). It didn't change anything..

I have a ASUS A7V133, with a TB 1,2 GHz. The cpu is able to run 133 at fsb. And the multiplier is not locked (it's AXIA). Anyway i can run 12x100 fine, but 9x133 won't, it locks up. So I've checked the CPU in a friend's computer, no probs there. I've tried some other RAM, didn't help (PC133 of...

I have a coolermaster, which is AMD certified to 1,2 GHz. With it, my cpu (1,2 GHz TB) gets above 60c. Now i'm thinking about getting this one, how much better will it be: Taisol CGK742092, which is AMD certified to at least 1,2 GHz ? Or should i get the big brother: Taisol CGK760092, which is...

I know it's the wrong forum, but please help me.. My Cpu is a TB 1,2 GHz. I have a ASUS A7V133 motherboard, and 512 PQI PC133 RAM. My cpu will get around 60-62c hot, when i run 3dmark 2001 (which i think uses the cpu, but i could be wrong ?). Anyway it runs fine at 12x100, but if i set the fsb...