Recent content by doron

PUCK, Does the Flash reader works also as writer? I want to load pictures from the computer to the camera, in order to show them on a TV Thanks, Doron

I only can play 1 on 1 . I have Radeon 32 DDR and T-bird 750 via KX-133 based system. Any advice? Doron

I tried to falsh a new bios , using award flasher ver 7.64. After I saved the old bios to the flopy , I got this warnin "the file you are about to use has a different name han the on that is currently used do you want t procee?" How should I consuider his remak? I opened the box and...

yesterday it was 299.95$ and free shipping at buy.com so the actual saving is not THAT big. there is also a coupon of 15$ you can use Doron

S&H is 11$ This memory will not work on just every system. I bought 2 for my kx133 chipset boards, I hope it will work ok. Doron

not a good deal: 1. system pull - not new 2. only 30 days warranty 3. k6-2/3 is dead a long time ago 4. for 50$ you can get slot A Athlon board. Check www.pricewatch.com Doron

1) 750 Mhz T-birb , 256 Mb crucial , ATI Radeon DDR retail=1720 2) 566 Mhz Celeron , 128 Mb Kingston Value Ram Intel 810 chipset (on board video)=820 Doron

Its on its way Good luck Doron

Just sent you the beta bios. Good luck. Doron

Had this board in the past. It is a LX board, fsb: 66, 75 , 83 , not a bad board , but limited overcklocking posibilities and you cant put a vid card with more than 16 Mb mem. Doron

I am running now a Celeron 566 Mhz on this board. Got a beta bios from MSI so it detects the Celeron ok (befor the bios upgarde it worked fine but the procssor was detected as "cupermine running on 127 MHZ" Look at the board you have , if you see on the battery a blue label with...

1. Did you install the processor in the board? 2. Acoding to FIC's site, if your board version is 1.4 it will support up to 100X7.5=750Mhz Vrsion 1.3 board will support only 100X4.5=450 Mhz 3. your potential overcklocking with this board is:83X9.5=790Mhz 4. where did you buy the board from? It...

Saw at compgeeks that they sell this board for 29.95$ I am intrested , only if I can run on it a Celeron-700Mhz. In case I need a slotket , which one do you recomend? Thanks, Doron

Andrew99 - you've got a point there. 1. First I installed the board in the case. Put In T-bird 750 Mhz slot A, Radeon video card and 2x128Mb crucial memory. On the first atempt it did not boot - nothing. Only fan and power light went on. I played a little with the power and reset switches and...

No, I just installed the board for the first time, and the problems started right from the beginning. Doron