Recent content by DonaldD

Hi Xeon, Thanks for responding. The drives do not have any jumpers. There are pins but the Seagate web site indicates they are for "factory use only". The BIOS does recognize that the drives are present. The RAID is listed in the boot order options and I was able to run the onboard Intel...

I need some help. I have a P4C800-E Deluxe MB that I am trying to set up. I have two Seagate ST380013AS SATA hard drives that I want to set up in a RAID 0 configuration. I have turned off the Promise controller on the MB. The Itel controller is on and the BootROM is enabled. I have run the...

You were correct. The MB User Guide was not real clear on which set of SATA connectors to use. I can now get the setup program to run and I set up the RAID Volume. However, Windows still does not find the hard drive(s). I am going to download a utilitiy from the Seagate website and give that...

I just put together a PC with a P4C800-E MB. I have 2 Seagate SATA drives installed with the intent of setting up a RAID 0 configuration. The drives are connected to the SATA RAID1 and SATA RAID2 connectors. According to the manual I should see a prompt for CTRL-I during POST to enter the...