Recent content by Dhurd3

Cool, glad to be of help!!!

You will need to remove the fan and shroud from the heatsink. Now put the shroud on the heatsink with the fan opening facing up. As you do this you will notice that the heatsink clip is in the way. Mark with a marker where the clip lines up on the shroud and cut grooves with a Dremel Tool to...

Here are a couple. MBProbe and CPUCool. Good luck.

If you use a slotket you are now using an fcpga chip so an fcpga cooler is needed. The Alpha PEP66 was designed for the slotket and any better heatsink/fan would be hard to find. You can check it out here: AlphaPEP66.

Same thing here.

IWil KK266R T-Bird 650@733 133x5.5 VIO@3.56 CPU V@1.80 Globalwin WBK38 w/Artic Silver II 256mb Corsair PC133 cas2

Correct, the motherboard still does the 200 mhz bus, but also does the 266 mhz bus!!! Giving one more overclocking options. Most people with these mobos don't even have 266 mhz cpus, they are really just coming onto the open market. Although many are running them at 266 mhz with a little lower...

Scrape off what you can and then finish up with rubbing alcohol.

I'm looking at the MSI K7T Turbo-R myself. Found a good deal at newegg.com, link following. Free Fedex Saver shipping right now. Good luck! MSI K7T Turbo