Recent content by DFITechsupport

Hi DefRef, 1. To over clock, especially using SATA H/D, please set the clock speed of AGP/PCI/SATA to 66/33/100 MHz. 2. To clear the CMOS is last thing you can do if your system got no POST after overclocking. (Unplug the power, move the jumper to the other end and move it back in about 10...

Shrap, Please try to minimize the testing component with only the CPU, memory and AGP card. Re-sit the CPU (press the CPU all the way down and pull the handle on the side of the CPU socket up and down for 7 times) then turn the power on again. If still doesn't work, please E-mail to...

Hi Broken, Please E-mail to tech@dfiweb.com. We'd like to send you the spec of DFI NFII Ultra and SoundStorm settings. Thanks DFI Techsupport

Hi eXoR, Sorry for late response. (We've got only one technical support engineer here for this whole week). It seems to me you have two H/Ds in your system. One SATA and one regular IDE. Since the SATA controller is shared with the primary IDE channel. We can't use the primary IDE channel and...

1. The DFI LANParty PRO875 shouldn't have any problem to mount on Prometeia MachII (Very expensive Cooling System?). We provide standard Intel P4 M/B mounting holes. 2. I double-checked with DFI H/Q last night. They said the PRO875 II would be released around mid September (Marketing strategy)...

I sent out the BIOS for PRO875 on 6/14/03 to a couple of customers as they requested this morning. I wonder if you are the one. Please let me know if you didn't get it. Thanks DFI Techsupport

Sorry. I didn't get these info from PM. Let me check with them tonight and keep you updated tomorrow. DFI Techsupport

Co-workers Wanted: We wonder if there is anybody looking for a Technical Support job (living in the Bay Area of San Francisco is a must). The major function of this job is to answer any technical question in this Forum. OC and on line game playing experiences are also required. Will train...

Hi Ben Skywalker, 1. I did check with DFI H/Q last night. DFI LANParty NFII does fully support thr NForce2's MCP-T in terms of audio. They also sent me some attachment to prove this. 2. Please search http://www.lanparty.com.tw for the standard Accessories. Please E-mail to tech@dfiweb.com...

Are you Stanley? I did send a BIOS to Stanley already this morning. If you are not Stanley, please send E-mail to tech@dfiweb.com. We'll send you a BIOS for OC as well. Thanks DFI Techsupport

Yes, this is the easiest way to get the replacement. As a matter of fact, our quality is not that bad. But even one in a thousand, we still have the chance to get the defective one. Please keep us updated. We'll be always here to try our best to help. Thanks DFI Techsupport

nothing0011, It seemed like the boot problem is OK now. To make sure the board is good, please don't play CO but to load Optimized Default first and then load OS and applications. Until everything OK then start playing OC. You need to have a powerful CPU cooling fan even you've got a set of...

Hi ijesse, Please send E-mail to tech@dfiweb.com. We'd like to send you an update BIOS for testing. Besides, please check the FAQ on www.dfi.com for LANParty PRO875. The SATA H/D needs to run on 100 MHz all the time. There are some tricky settings under the BIOS for overclocking. I think the OC...

Hey ArborBarber, We'll check this link from time to time. I think there'll have some other Anandtech fans can share their experience on playing DFI LANParty PRO875 with us. Thanks DFI Techsupport

Nothing0011, We received your E-mail last night. If the board boot up fine on the test bench, theoretically, there shouldn't have any problem to put everything into the case. Please try to minimize the testing environment again. Then put one component back at a time if it works. Don't worry...