Recent content by dani3lc

well i had did manual memory timing as suggest by some forumers am running 11-12-11-29 now on manual without profile. i did a memtest on it overnight and happily to said i got 44 passes with 0 errors. i think this is stable right? after all i din get any bsod yet after 1 day of idle + usage so...

well i just check bios though, all my settings are comes in default and its based on the correct figures...i feel more faint bout it now you can check the image .... you can see the Dram Voltage is as mention on 1.65 and the timings are as follow 11-11-11-30....should i increase the VDDNB...

weird the link you put written the CAS latency on 10-10-10-30 but base on CPU-Z and the xmp profile that it set automatically it is on 11-11-11-30. So do i need to change the timing to follow as well??

you mean the voltage which i increase from 1.1v to 1.3v before?? i need to put it at least 1.65?? as mention on the link???

im sorry but as i mention i got 0 knowledge on ram management. What do you mean by undervolting the ram?? you mean the timings?? i put it on auto as Set under the xmp or docp profile though ....please advice me what to do.....

well i din try for a week but based on my current situation my comp doesnt survive more then 12 hours - 15 hours on 2133mhz while when use the 1866mhz i have try idle it for over 48 hour-52 hours and have 0 bsod at all

well just a small question though since i can downclock it stable on 1866mhz doesn't it means my ram should be good? still need to do memtest? sorry to ask i really have 0 knowledge on ram management

well my default voltage on 1.1x at 1st i already try increasing up to 1.25 and 1.3 before and i still get bsod

well actually i set before on 1866mhz on default timings and on the crap psu.....and i got no bsod for at least 48 hours which actually i think it is on stable situation due to frequent bsod everyday at least once or twice on 2133mhz. so im quite confirm having it on 1866 its stable

so which should i actually do 1st? some forumers do suggest me to tune the ram timings which actually i got 0 knowledge on how to configure it or just get a new psu and try???

i have this older Gigabyte PoweRock 420 psu so is this better shud i replaced for it??

well i bought this from a local shop on my area and it mention that since i running only the internal apu graphics that was sufficient enough as voltage can be tune on the bios.. http://www.avf.com.my/avf.php?c=72&p=313 this is the model that i bought

yeah as since im running only the apu graphics i thought that i won't need a much higher power psu though. well as apu runs on better memory frequencies so i thought clocking it higher could have better gaming performance though. seriously having that psu could affect that much problem??

Hi guys im new and need some help here i build up a budget gaming pc with the spec as below - Asus A88XM-A motherboard - AMD A10 7850k APU processor - Apacer Ram Desktop DDR3 GIANT II 8GB PC2133 - AVF PSU EXTREME POWER 750W I make a clean install of Win8 Pro. I read on the forum on...