Recent content by crobb100

Yeah-that's the next step-I like to use plastic over cardboard-hehe, not the conducting plastic that the MB comes in. Just a huge pain in the butt to get it all out of the case after all the cables have been arranged so nicely :P Will let ya know what happens. At least the Asus board has...

OK-I have: Replaced and switched around RAM Replaced video card with different card Reseated all HD power & connection cables Running Thermaltake PurePower 480 watt PS, no problems with it. Can hear HDs spinning up at power-on Only thing I haven't done yet is replace the processor...

OK-I briefly tried reseating the RAM and HD connectors already, but the system should boot into BIOS without HDs, right? I'll try pulling a stick of RAM and trying that-attempted to run Memtestx86 from a floppy at boot, didn't run. I think the fact that I am not getting into BIOS and no beeps...

PSU is OK-fans are on-all case fans & CPU fans. Case lights on. HD's seem to be spinning up. No BIOS beep at all. BIOS does not seem to be loading.

Hi- Running an Asus P4P800 MB with P4 3.2, ran fine last night. Turned this on this AM, no boot, no BIOS screen-nothing. Attempted to boot from WinXP disc-no luck, from Asus installation disc-nothing. I reset the CMOS, nothing. Ideas? What next? Help!

Hi- Using a Dell Inspiron 9300, few weeks old. I print a lot of photos, usually with a Canon IP8500. My photos print with a green tint, with multiple print programws and on multiple printers. Dell hasn't been of help with this. Connect via USB cable to printers. Test pages from...

Just an XP home edition disc, not XP Pro. Will it work?

Wow-fast reply! Thanks. OK-I start from XP CD, now the system starts setup, but goes to a blue screen saying "The file pci.sys is corrupted. Press any key to continue." I press a key and it reboots to the same screen. Can't seem to start repair. Next??

Hi- Got up today, and my system with XP Pro starts up, goes through POST, the XP splash screen shows up then it loops through boot sequence again and again. I tried to enter Safe mode, same result. Also tried XP disc-/fixboot and /chkdsk, chkdsk found a few errors and otherwise scanned OK...

OK-I just dropped it back to the ATI control panel instead of Catalyst Control Center, works fine. I never did figure out what was going on with the Catalyst Control Center. I have another system with same OS, same NIS, Ad-Aware, Spy Sweeper and firewall settings on which it works fine...

hmmm-no, no error messages. I do have Ad-Aware and NIS running, tried turning off but no help. The advanced button in display properties doesn't work, either. Catalyst Control Center button is there, just won't open. I have the same things running on my other system, though, and it works there.

yes-redownloaded to make sure.

yes

Hi- Installed new Catalyst, have icons but cannot get Catalyst Control center to open-tried with desktop icon, programs icon, reinstalled after removing all ATI software-no luck. Any thoughts? Thanks

Interesting-these both look nice, great prices-but I can't seem to locate the response time anywhere in the 2001 info. Am I just missing it, or did they hide it somewhere? Thanks