Recent content by coder3d

  1. C

    OC My E7200, Please!

    The only thing is that for some reason my cpu speed in system information programs shows 3800 when it is actually 3000 im guessing that this is because it assumes the 9.5 multi still which would make 9.5x400=3800. Anyway to change this from showing up that way?
  2. C

    OC My E7200, Please!

    I did exactly what I said to achieve a 3Ghz OC and it posted! It is set on a 1:1 ratio. I also was able to keep my RAM at its natural state of 4-4-4-12 at 800mhz. Thanks for the help guys.
  3. C

    OC My E7200, Please!

    I think im starting to get a good grasp on this.... 1. Should I make the FSB 400 and set the CPU Ratio at 7.5, im guessing this is the multiplier, this would make it 7.5x400=3000Mhz? 2. Also I should increase the Vcore from the current 1.19 to 1.24(a .05 increase)? 3. Finally if I...
  4. C

    OC My E7200, Please!

    I appreciate the side notes but can we get back to my original post please. I just want a decent overclock nothing ridiculous like 3.5Ghz at this point. :-)
  5. C

    OC My E7200, Please!

    The voltage has been on auto and I did change the FSB alone which caused a no post. Transaction booster has the option for auto and manual and when I enter manual everything is disabled anyway. What exactly is that anyway?
  6. C

    OC My E7200, Please!

    Im just worried about having to open the case and reset the cmos again. What is a safe way to go about this? Like I said earlier I tryed to just change the FSB to 333 from 266 and leave everything else alone and that gave me no post... Something else must need to be changed too. What do you all...
  7. C

    OC My E7200, Please!

    Hello, I just built a new system and I am trying to overclock my E7200 processor. I have heard that with the combination of my board, ram, and cpu i should be able to get a decent overclock. I am using an ASUS P5QL Pro Board with G.SKILL 2 x 1GB RAM DDR2 PC2-6400 (800Mhz) (4-4-4-12). The...