Recent content by CheesyBadger

It seems to have been the "RAID-ready" issue that you diagnosed. Appears to be working fine after following the steps that I listed above. Thanks for your help so much lehtv!

Sandisk X400 512GB M.2-2280, and I think it was in AHCI now that you mention it. If I'm understanding what you're saying the correct order to do things would be... 1. Unplug raid drives to avoid reserve drive being installed in them 2. Set BIOS to raid mode 3. Install windows to m.2 SSD 4...

My current config is m.2 in the M2D_32G which is showing up as SATA_3, the HDDs are in SATA 1,2,4,5. If I'm reading the M2D_32G chart right on the same page, that should be compatible. I did have this configuration working before, but had a disk name collision issue I'm trying to resolve with...

I've setup my latest PC build but I'm having issues getting my m.2 boot/system drive and my raid 10 array to work correctly. I've loaded windows 10 on the m.2 SSD and now I am attempting to setup a raid 10 array using 4x 4TB hard drives in the UEFI raid configuration on my GA-Z170X-UD5 MB. Was...