Recent content by caseyc

  1. C

    ASUS P4C800E Deluxe Pentium M problem

    ***This was also posted on Tech Support Forum yesterday*** Hi, I have the following setup. Motherboard:ASUS P4C800-E Deluxe CPU: 2.0Ghz Pentium M + ASUS CT-479 upgrade kit with modified Zalman 7000 ALCu and Nexus 92mm for quiet cooling Memory:GeIL 2GB (2x1GB) PC3200 HD Drives:2 X Samsung...
  2. C

    clicking noise and monitor flicker

    All sorted. Updated drivers and it works fine. Drivers difficult to locate - Realtek. Had to go to mobo manufacturer site (Gigabyte) and locate the drivers from there (sound is onboard).
  3. C

    clicking noise and monitor flicker

    No luck with reseating graphics card, RAM and CPU. Trying to uninstall audio driver at the moment. I have noticed that the clicks coincide with the screen flicker and momentary freeze. caseyc
  4. C

    clicking noise and monitor flicker

    Thanks, I'll give all that a go and post back the result.
  5. C

    clicking noise and monitor flicker

    Troubleshooting a machine for someone and they are having a problem with clicks and a screen flicker. The machine is a new Hewlett Packard running XP with a celeron chip and 512MB of RAM. I don't have the details of the graphics card or the sound card but I can find these out if someone thinks...
  6. C

    SATA drives master/slave problem

    Perfect. Thanks invisible computer people wherever you are. caseyc
  7. C

    SATA drives master/slave problem

    I have 2 Samsung Spinpoint drives (SATA). I know that they do not require jumper settings but only one is showing up in "My Computer" on XP Pro. The device manager shows both drives working properly but I cannot access the one that does not have the OS. The OS drive is 80GB and the other is...
  8. C

    2.0 Ghz Pentium M running at 1.06 Ghz. Why?

    Thats very useful advice. The memory in use is 2 X 1GB PC3200, I will try pushing up the multiple and see what happens. My only concern is that it might cause the chip to run hotter and result in increased fan noise which I need to keep to a minimum. Also, you mentioned about the Pentium M...
  9. C

    2.0 Ghz Pentium M running at 1.06 Ghz. Why?

    Got it sorted on another forum. Here's the link. http://techreport.com/forums/viewtopic.php?t=34376 Thanks for the help. caseyc
  10. C

    2.0 Ghz Pentium M running at 1.06 Ghz. Why?

    The only additional thing the adaptor allows as far as I can tell is the option to choose the FSB speed (400 or 533). As you observed it is set to 533. I suppose I could bring the processor down to 1.06 again and see how it works with the software I will be using and alter accordingly. The...
  11. C

    2.0 Ghz Pentium M running at 1.06 Ghz. Why?

    I have the correct BIOS version and have altered the multiplie to bring it up to 2.0Ghz. I was happy with that but based on arcas' response should I have left it at 1.06 and allow Windows to push it up as it needed to?
  12. C

    2.0 Ghz Pentium M running at 1.06 Ghz. Why?

    I have a 2.0 Ghz Pentium M running at 1.06 Ghz. Is this normal? It is being used with an ASUS CT-479 adaptor and an ASUS P4C800-E Deluxe mobo.
  13. C

    ASUS P4C800-E Deluxe

    Thats sorted. Got a heatsink for the P4 and updated the BIOS. Put in the M chip after that and it booted fine. Thanks for the help, caseyc
  14. C

    ASUS P4C800-E Deluxe

    Any idea what BIOS version the board ships with?
  15. C

    ASUS P4C800-E Deluxe

    OK, Idont think it has that but I have downloaded the latest BIOS for it along with the Afudos update tool. What does "double post" refer to? caseyc
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom