Recent content by CamperJoe

Is it time for a new PS? Currently using AMD approved AOpen 250w PS. Here are my reading: +5v @ 4.8v 3.3v @ 3.38v +12v @ 11.90v Specs: T-Bird 800 @ 988 (9.5*104) MSI K7TPro2-A mobo (1.85 vcore) Thanks guys!

1. fastwrites 2. side band addressing 3. anisotropy filtering Thanks guys!

Mikewarrior2: yup, it's maxed out at 1.85v - that's as far as my mobo can go without getting dirty with voltage mods. Just a thought, but from your experience, does a SUDDEN rise in ambient temps of 4-5c in 5 minutes (i.e. crank up the heater) cause the CPU to be unstable?

Hey guys, Previously, while running @ 954MHz (9x106), I noticed that round off errors in Prime95 start popping out once my temperatures (as measured by mobo) hit 55c (ambient temp of 24c). After installing the WBK38 HSF + ASII, I upped the speed to 1007 (9.5x106) and get temps of 37c idle and...

I was surfing around and came accross this article: http://www.2cooltek.com/geforce3.html It claims that the gfx card performed 50% better in 3dMark2001 after using a particular cooler WITHOUT o/cing. Coming from a reputable retailer, i'm just curious, but assuming the same MHz, would a cpu/gpu...

Hey guys, Recently removed the stock fan to apply some thermal paste and unlock the L1 bridges to OC as I heard it's better than the provided pink thermal glue/pad/gum/whatisitanyway? ... Firstly, I used my nails to scrap off most of that pinkish stuff off the core & heatsink and followed...

needed: gaming machine option 1: T-Bird 800Mhz @ 800Mhz on KT133 mobo option 2: Duron 800Mhz @ 800Mhz on KT133A mobo note: well the t-bird certainly has more cache but the kt133a chipset has better memory scores on average i heard... so which choice yields better performance? it's either-or...

so does that mean chances are, i won't fry any pci/agp cards on a kt133 mobo then? out of curiosity, what then is the max agp/pci bus speed for a nic/sound card/gfx card for any given mobo (ie kt133a)?

thanks guys!

specs: msi k7tpro-2a mobo t-bird 800mhz 256mb pc133 cas3 generic ram problem: in bios, fsb = 100 but wcpuid v3 reports it as 99.95 and when i crank up fsb in bios to 105, wcpuid reports it as 104.91 only... however when i increase fsb using FuzzyLogic3(msi supplied overclocking software) say...

help me out guys! i'm stumped... specs: t-bird 800mhz @ 840mhz (105x8) msi k7tpro-2a mobo 256mb cas3 pc133 generic ram @ 140mhz (due to 105 fsb) problem: my fsb slowly decreases slightly over time. for example, right now, after setting it to 105, it slowly goes down to 104.95 - 104.90...

help me out guys! i'm stumped... specs: t-bird 800mhz @ 840mhz (105x8) msi k7tpro-2a mobo 256mb cas3 pc133 generic ram @ 140mhz (due to 105 fsb) problem: my fsb slowly decreases slightly over time. for example, right now, after setting it to 105, it slowly goes down to 104.95 - 104.90...

myself: Abit Siluro GeForce 2 mx detonator 3, version 10.80

myself: Abit Siluro GeForce 2 mx detonator 3, version 10.80

question: recently bought a 128mb pc133 dimm (hyundai) and now whenever i boot up, it reports "unknown flash type". also, sisoft sandra doesn't report the dimm's brand as well... have i been conned? thanks for your 2c! specs: tbird 800mhz msi k7tpro 2a 1x apacer 128mb pc133 dimm 1x...