Recent content by Bunta

Sorry for the double post:o

Warm deal for 1.6Ghz and 1.8 Ghz retail northwoods at Googlegear: 1.6 $156 1.8 $213 Googlegear

Try resetting CMOS either through a jumper ( if there is one) or by removing the battery and reinserting it. Last weekend I tried to set up an ASUS p4b266 + P4 1.8 system and had the same problem. Couldn't get a video signal to save my life, and it wasn't the video cards either. Returned the...

You can order them directly from noisecontrol.de in germany: Silverado I have one...been using is for a couple of months now. To be perfectly honest, I have mixed feelings about it. Don't thinks its as good as it was cracked up to be. Its fairly quiet and is easy to install. I occasionally...

I can understand your frustration since I had the same problem with the blizzard copper hsf, which i eventually returned. If fact, I would expect lower temps with your setup since you were using the black delta while I am only using the sunon fan. Maybe my mobo temp readings are incorrect, I...

NesuD No I do not work for KD computers! Yes, it is a swiftech knock-off, I don't believe I ever said otherwise, and I certainly didn't tell you that KD computers sold the MC370. I am using their "knock-off" with a 27cfm sunon fan and my temps run about 35C idle and 48C under...

Nicowju Thanks for the reply. Did some more research on the A7V133 and know now that it has the promise raid controller, but from what I read it is a scaled down version and will only do raid 0 bur not raid 1. Can anyone verify that? Does anyone have a raid 1 setup on an athlon mb, A7V or...

Thanks for the reply cbuchach. I didn't realize the A7V133 had onboard raid. Which controller does is use and will it do raid 1? Thanks.

Does anyone have Windows 2000 running stable on a KT133a motherboard with raid 0 or raid 1? If so, what motherboard are you using? I currently have a P800 on an abit SA6R raid 1 with Windows 2000 completely stable, but I want to switch to a faster tbird/kt133a combo. I have read a couple of...

Sharpstick YG email:D Bunta

Hi Sharpstick Thanks for your reply in the other thread. I really think my problem is related to heat since I am running a higher temp than you at idle. I tried to change the cpu multiplier to 11 with a fsb of 130, but on boot up it is only recognized at the default multiplier of 10. Are you...

Hey Sharpstick, I just asked you about your new system over in compuwuz's thread(hope he didn't mine a little tech discussion in his sales thread I also purchased an axia pretested at 1.5 from him but can't get my system to boot up into win 98se at 133 fsb (set via mb jumper). I can up the fsb...

UltaBananflue How did you get your Silverado so quickly. There is a 2-4 week backorder on their site. Have you tried it out yet and if so is it a quiet as touted. Thanks.