Recent content by Bncybul

I guess the way I wrote my question is confuseing you. I don't want to run my AIW128 at 4x, I want to run it at it's proper speed 2x, but the setting to change the speed in the BIOS is missing. According to the manual you have two choices 2x-4x, when it is shipped from the factory it is set at...

I just bought a Abit SH6. It works fine except for one major problem, part of the BIOS is missing. The last three settings under ADVANCED CHIPSET FEATURES is missing. Read my posting in this forum (missing settings),and if you end up buying this board check those settings the first time you...

I'm using the onboard vid right now. The mobo is perfectly stable and fairly fast with the onboard. I've seen postings from other buyers of this board who returned it because of grapic card unstability. I'm thinkig that their problems might have been caused by the same thing. Do you know if a...

I checked ATIs' website and found something called( CMOS settings which affect display adapters). AGP 1x 2x 4x: Should be set to match the capabilities of the graphics adapter. That's when I found out that the settings were missing under Advanced Chipset Features. The manual says that the...

I recently purchased an Abit SH6 i815E motherboard. This board was just reviewed here in Anand. Here's my problem, I have a All-In-Wonder 128 AGP vid card that's flacky as hell in this board. It's a 2x AGP and the settings in the BIOS for changing the board to 2x are missing.There are two...

I'm reading thse threads and I think I should explain something. I switched mobos,but i went Abit to Abit. The OS and all my stuff stayed on the HD. When I booted the new board the first time it recognized the HD and I was in action. Since I switched from BX to 815E Windows ME installed a...

OF, what I mean is is it just called Microsoft IDE controler? Is there a version number? I'm thinking maybe I can download it,delete the Intel,reboot, and run Micro.Excuse the spelling. bo

O-F I'm running ME now,clean install with ME update and full version of 98SE.Anand just reviewed this board (Abit SH6),and they used the Intell stuff. I didn't know that Microsoft even had a version. That's probably what was on here before I changed to the Intel. A whole bunch of new stuff...

I'm sorry O-F PIO mode is set to 4. That setting also has an auto mode. I have UMDA set to AUTO. bo

O-F, second boot screen PRI.MASTERDISK:LBA,ATA66,30022MB. I had it set to AUTO but that didn't work. I figured settin it to 4 might kick it in. Bo

I'm running ME and that's not an option under( settings) in disk drives anymore.DISCONNECT is checked and SYNC DATA TRANSFER IS CHECKED. Funny DMA is still an option under CDROM.

I just switched an AbitBE6-II for an Abit SH6. Surprise,surprise, my HD had been running at ATA33 the whole time I was useing the old board.I am now trying to get the new board to run at 66. I didn't reformat when I switched and the HD was properly recognised( Qunatum Fireball LM 30gig ). The...