Recent content by Blammo300

We have a office using 13 windows xp machines and 4 printers. We have 5 of the computers defaulting to printer #3. For some reason though everyday these computers lose that printer as default and no printer is then defaulted. So I set it as default again only to have it undefault later. Is...

Thanks for the advice everybody. Just to give you guys a better idea of what were trying to setup. We are installing this system into a Health treatment center that does chiropractic and surgical work. The software that is going to be networked is accounting software and also a medical...

My friend owns a small business and asked me to do some research on the kind of server they would need to run software remotely and share files. Currently they have 15 workstations that and will probably increase that amount by 10-20 in the next 2 years. The workstations each run the same...

I have 2gig of both patriot and Gskill and was wondering which would be the best to use. The specs for the Patriot: Speed DDR2 667 (PC2 5300) Cas Latency 4 Timing 4-4-4-12 Voltage 1.8V Specs for the G Skill: Speed DDR2 800 (PC2 6400) Cas Latency 5 Timing 5-5-5-15 Voltage...

I just got a new DSL modem that acts as a router also but not wireless. I have a Linksys BEFW11S4 wireless router and a Netgear FS105 switch lying around. I would prefer to use the Linksys because of the wireless feature but I was wondering if have a router behind another router would cause...

Basically I just want to know if other brand hard drives will fit into the dell as long as it matches the specs of the originals.

I am looking at installing a new hard drive in my Dell server. The hard drive needs to fit in the swap tray that is in the front. My current hard drives are Seagates but I found the fujitsu to be cheaper for a 15k RPM 34gig HD. Would this Fujitsu MAX3036NC 36.7GB 15,000 RPM SCSI Ultra320...

What are the chances of a Dell poweredge server having the internal spots for a 68 pin scsi?

I ordered a Seagate Cheetah 15K.4 36.7GB SCSI Ultra320 68pin Hard Drive. The Dell server I am installing it into has front ports for hard drives but they are using the 80 pin connection. So do I have to buy an 68pin to 80pin adapter or can I just install the 68pin inside the server?

I am finally getting rid of this crappy MSI 975X Platinum motherboard. It has been nothing but a problem since I purchased it. I need recommendations on the best MB for under $130. I am running a Duo 6300, 2 gig ram DDR2 667 and a PCI-E 7900GS.

I was hoping for a program I just purchase in the begining and can use after for no more charges.

I work for a Real Estate company and we have thousands of Realtor emails we need to send to. Does anyone know a good program that could send thousands of emails in bulk?

Now the Athlon XP 2400+ will not turn on at all. I messed around with the heatsink trying a couple diffrent ones and the monitor will no longer turn on. I put my old 1.4 tbird into the system and everything works fine although the temp for the t bird says reserved in the bios. Did I break the...

When I lower the CPU voltage the temps do come down, but I lose speed it is a 2500+ XP but I have it running at 1800+ at 165F. Could the CPU be messed up so it produces more heat then usual?

Before I put the new heatsink and fan on it was running very bad. I thought it was a RAM problem since the monitor would not turn almost half the times you booted it up. It is still running hot according to the bios (170F), but all the problems are gone relating to random lock ups and the...